NextSDS Logo
Safety Data Sheet EN

DELETE LOCTITE LB 8008 C5-A BO

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
DELETE LOCTITE LB 8008 C5-A BO

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Antiseize

Manufacturers & Suppliers

H

Henkel Australia Pty Ltd

manufacturer

135-141 Canterbury Road, Kilsyth, Victoria, 3137, Australia

+61 (3) 9724 6444

Emergency Contacts

Emergency Contact

1800 032 379

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Dam. Cat. 1
Aquatic Acute Cat. 2
Aquatic Chronic Cat. 2

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS09 - Environmental hazard

GHS09

Hazard Statements

H315 Causes skin irritation.
H318 Causes serious eye damage.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P264 Wash hands thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves, eye protection, and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P391 Collect spillage.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to remove. Continue rinsing. Get immediate medical advice/attention.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Section 3. Composition / information on ingredients

Chemical Name CAS Number Concentration Hazardous
Distillates (petroleum), hydrotreated heavy naphthenic <3%DMSO 64742-52-5 10 - 30% No
Calcium dihydroxide 1305-62-0 10 - 20% No
Copper 7440-50-8 10 - 30% No
Graphite 7782-42-5 10% No
Quartz (SiO2) "respirable particulates (reaches the alveoli)" (RCS) <0.1% 14808-60-7 10% No
copper flakes (coated with aliphatic acid) 7440-50-8 10% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If symptoms persist, seek medical advice.

Skin contact

Rinse with running water and soap. Seek medical advice.

Eye contact

Rinse immediately with plenty of running water (for 10 minutes). Seek medical attention if necessary.

Ingestion

Rinse mouth, do not induce vomiting, consult a doctor.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide, foam, powder

Unsuitable media

High pressure waterjet

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not empty into drains / surface water / ground water.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not inhale vapors and fumes.

Storage

Store at room temperature.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Copper Paste
Colour
---
Colour Intensity
---
Form
---
Odor
mild
Odor Threshold
---
Ph
Not applicable, Product is non-soluble (in water).
Melting Point
Not applicable, Product is a liquid
Boiling Point
> 100 °C (> 212 °F)
Flash Point
> 93 °C (> 199.4 °F)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
< 1 hPa (; 20 °C (68 °F))
Vapor Density
> 1 Heavier than air.
Relative Density
---
Bulk Density
---
Density
1.3 g/cm3
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
Not determined
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
0 % (VOCV 814.018 VOC regulation CH)
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of temperature and pressure.

Avoid

Avoid excessive heat and ignition sources.

Incompatible

Reaction with strong acids. Oxidizing agents.

Decomposition

In case of fire toxic gases can be released. carbon oxides.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3082
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Copper)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for DELETE LOCTITE LB 8008 C5-A BO?

The signal word is danger.

What is the physical form of DELETE LOCTITE LB 8008 C5-A BO?

DELETE LOCTITE LB 8008 C5-A BO is a liquid appearing as copper paste . It has mild odor.

What is DELETE LOCTITE LB 8008 C5-A BO used for?

Antiseize

What are the hazard statements for DELETE LOCTITE LB 8008 C5-A BO?

This substance has 3 hazard statements:

  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.
  • H411: Toxic to aquatic life with long lasting effects.

What is the melting point of DELETE LOCTITE LB 8008 C5-A BO?

The melting point is Not applicable, Product is a liquid and the boiling point is > 100 °C (> 212 °F).