Formaldehyde 35 % TECHNICAL stabilized with 10-15 % of methanol

Immediately call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. Immediate medical treatment required because corrosive injuries that are not treated are hard to cure.

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.

Immediately call a POISON CENTRE/doctor. Do NOT induce vomiting. Rinse mouth thoroughly with water. Give nothing to eat or drink.

The product itself does not burn. Co-ordinate fire-fighting measures to the fire surroundings.

no restriction

In case of fire may be liberated: Carbon monoxide, Carbon dioxide (CO2)

Use water spray jet to protect personnel and to cool endangered containers.

Do not breathe gas/vapour/aerosol. Provide adequate ventilation. Use personal protection equipment. In case of major fire and large quantities: Remove persons to safety.

In case of major fire and large quantities: Remove persons to safety. Wear a self-contained breathing apparatus and chemical protective clothing.

Do not allow to enter into surface water or drains. Make sure spills can be contained, e.g. in sump pallets or kerbed areas. Discharge into the environment must be avoided.

Clean contaminated articles and floor according to the environmental legislation.

Avoid inhalation. Avoid contact with eyes and skin. Protect from moisture.

Keep container tightly closed and in a well-ventilated place.

Wash hands before breaks and after work. When using do not eat, drink or smoke.

Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact Suitable material: NBR (Nitrile rubber) Thickness of the glove material: 0,12 mm Breakthrough time:: 240-480 min Recommended glove articles: VWR 112-0998 By long-term hand contact Suitable material: NBR (Nitrile rubber) Thickness of the glove material: 0,38 mm Breakthrough time:: Recommended glove articles: VWR 112-3717 / 112-1381

Eye glasses with side protection DIN-/EN-Norms DIN EN 166 Recommendation: VWR 111-0432

Respiratory protection necessary at: aerosol or mist formation Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (DIN EN 136/140) Recommendation: VWR 111-0206 Suitable material: A1 Recommendation: VWR 111-8930

Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.

no data available

The product is chemically stable under standard ambient conditions (room temperature).

Vapours can form explosive mixtures with air.

Formation of explosive mixtures with: Oxidising agent, Nitrogen oxides (NOx), Material, oxygen-rich, Oxidising, Nitric acid, Chlorine, Bromine. Exothermic reaction with: Reducing agent, Acid, Acid halides, Alkali (lye), concentrated. Violent reaction with: Alkali metals, Alkaline earth metal. Formation of: Hydrogen.

UV-radiation/sunlight, Heat. This material is combustible and can be ignited by heat, sparks, flames, or other sources of ignition (e.g. static electricity, pilot lights, or mechanical/electrical equipment).

light metals, Plastic articles

no data available