Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ARC 855(E) B (Part A), ARC 855(E) G (Part A)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
ARC Polymer Composite. Repair damage caused by impact, abrasion, erosion or corrosion; rebuild worn areas; fill holes and cracks; provide abrasion resistant surfaces.
Uses advised against
No information available.
Manufacturers & Suppliers
Chesterton International GmbH
manufacturer
Am Lenzenfleck 23, DE-85737 Ismaning GERMANY
+49 89 99 65 46 - 0
http://www.chesterton.com
Emergency Contacts
GIZ-Nord
+49(0) 551 - 1 92 40
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Formaldehyde, oligomeric reaction products with 1-chloro-2,3-epoxypropane and phenol EC: 500-006-8 | 9003-36-5 | 15 - 20% | Yes |
| 2-(chloromethyl)oxirane;4-[2-(4-hydroxyphenyl)propan-2-yl]phenol EC: 500-033-5 | 25068-38-6 | 10 - 15% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
not applicable
Take off contaminated clothing. After contact with skin, wash immediately with plenty of water and soap. Seek medical advice immediately.
Symptoms: Causes skin irritation.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
Symptoms: Causes eye irritation.
If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Do NOT induce vomiting.
Immediate Medical Attention
Seek medical advice immediately.
Medical Treatment
treatment of symptoms
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry extinguishing powder. Carbon dioxide (CO2). alcohol resistant foam. Water spray jet
High power water jet
Carbon monoxide Carbon dioxide (CO2). Nitrogen oxides (NOx)
Co-ordinate fire-fighting measures to the fire surroundings.
Firefighter Protection
In case of fire: Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety.
Do not allow to enter into surface water or drains. Cover drains. Adverse environmental effects
Absorb with liquid-binding material
Materials: sand, diatomaceous earth, acid- or universal binding agents
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
See
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation as well as local exhaustion at critical locations.
Tested protective gloves must be worn: DIN EN 374 NBR (Nitrile rubber), Butyl caoutchouc (butyl rubber) Thickness of the glove material >= 0,4 mm Breakthrough times and swelling properties of the material must be taken into consideration. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Wearing time with occasional contact (splashes): max. 480 min. (NBR (Nitrile rubber)) Wearing time with permanent contact 240 - 480 min (NBR (Nitrile rubber)) Observe the wear time limits as specified by the manufacturer.
Suitable eye protection: Eye glasses with side protection goggles
Usually no personal respirative protection necessary. If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. Combination filtering device (EN 14387) A-P2
Protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The substance is chemically stable under recommended conditions of storage, use and temperature.
The product is stable under storage at normal ambient temperatures.
No known hazardous reactions.
Heat > 149 °C
Strong alkali, Strong acid, Oxidising agent
Carbon monoxide, aldehydes, Acid
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (epoxy resin)
- Transport Class
- 9
- Packing Group
- III
274, 335, 969
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ARC 855(E) B (Part A), ARC 855(E) G (Part A)?
The signal word is warning.
What is the physical form of ARC 855(E) B (Part A), ARC 855(E) G (Part A)?
ARC 855(E) B (Part A), ARC 855(E) G (Part A) is a liquid with black or grey color. It has sweet odour odor.
What is ARC 855(E) B (Part A), ARC 855(E) G (Part A) used for?
ARC Polymer Composite. Repair damage caused by impact, abrasion, erosion or corrosion; rebuild worn areas; fill holes and cracks; provide abrasion resistant surfaces.
What are the hazard statements for ARC 855(E) B (Part A), ARC 855(E) G (Part A)?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of ARC 855(E) B (Part A), ARC 855(E) G (Part A)?
The melting point is not determined and the boiling point is not applicable.