Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ARC BX2 (Part A) (GY, RD), ARC BX5 (Part A) (GY, RD)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
ARC Polymer Composite. Abrasion resistant two component coating, mixed and applied with a trowel.
Uses advised against
No information available
Manufacturers & Suppliers
A.W. CHESTERTON COMPANY
manufacturer
860 Salem Street Groveland, MA 01834-1507, USA
+1 978-469-6446
http://www.chesterton.com
A.W. Chesterton Company Ltd.
national supplier
889 Fraser Drive, Unit 105, Burlington, Ontario L7L 4X8
905-335-5055
Emergency Contacts
Infotrac
1-800-535-5053
24 hours per day, 7 days per week
Infotrac
+1 352-323-3500
24 hours per day, 7 days per week
NSW Poisons Information Centre
13 11 26
24 hours per day, 7 days per week
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Epoxy resin (number average molecular weight <= 700) | 1675-54-3 | 10 - 15% | Yes |
| Epoxy resin (number average molecular weight <= 700) | 9003-36-5 | 3 - 7% | Yes |
| Benzyl alcohol | 100-51-6 | 1 - 5% | Yes |
| Aluminum oxide | 1344-28-1 | 55 - 65% | No |
| Silicon carbide | 409-21-2 | 1 - 5% | No |
| Titanium dioxide | 13463-67-7 | 0.1 - 0.9% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, administer artificial respiration. Contact physician.
Symptoms: If vapors are produced, they will irritate the respiratory tract and cause coughing and labored breathing.
Remove contaminated clothing. Wash clothing before reuse. Wash skin with soap and water. Consult physician.
Symptoms: Moderate skin irritant. May cause skin sensitization as evidenced by rashes or hives.
Flush eyes for at least 15 minutes with large amounts of water. Contact physician if irritation persists.
Symptoms: Moderate eye irritant.
Wash out mouth with water. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person. Contact physician immediately.
Medical Treatment
Treat symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, dry chemical, foam or water fog
None known
Container may rupture from gas generation when exposed to intense heat.
Cool exposed containers with water.
Firefighter Protection
Recommend Firefighters wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid skin contact. Utilize exposure controls and personal protection as specified in Section 8.
Keep out of sewers, streams and waterways.
Scoop up and transfer to a suitable container for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid skin contact. Utilize exposure controls and personal protection as specified in Section 8. Remove contaminated clothing immediately. Wash clothing before reuse. Contaminated leather including shoes cannot be decontaminated and should be discarded.
Store in a cool, dry area.
Remove contaminated clothing immediately. Wash clothing before reuse. Contaminated leather including shoes cannot be decontaminated and should be discarded.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special requirements. If it is necessary to alter the final cured product such that dust may be generated, use adequate dust extraction or damp down.
Chemical resistant gloves (e.g., neoprene)
Safety goggles.
Not normally needed. If exposure limits are exceeded, use a half or full-face respirator with combined dust/organic vapour filter (e.g., EN filter type A-P2).
Impervious clothing as necessary to prevent skin contact.
Refer to sections 6 and 12.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Refer to sections 10.3 and 10.5.
No dangerous reactions known under conditions of normal use.
Strong mineral acids and bases and strong oxidizers like liquid Chlorine and concentrated Oxygen.
Carbon monoxide, carbon dioxide, benzaldehyde.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ARC BX2 (Part A) (GY, RD), ARC BX5 (Part A) (GY, RD)?
The signal word is warning.
What is the physical form of ARC BX2 (Part A) (GY, RD), ARC BX5 (Part A) (GY, RD)?
ARC BX2 (Part A) (GY, RD), ARC BX5 (Part A) (GY, RD) is a gritty paste appearing as blue or red with blue or red color. It has sweet odor.
What is ARC BX2 (Part A) (GY, RD), ARC BX5 (Part A) (GY, RD) used for?
ARC Polymer Composite. Abrasion resistant two component coating, mixed and applied with a trowel.
What are the hazard statements for ARC BX2 (Part A) (GY, RD), ARC BX5 (Part A) (GY, RD)?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of ARC BX2 (Part A) (GY, RD), ARC BX5 (Part A) (GY, RD)?
The melting point is not applicable and the boiling point is not determined.