Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ARC BX5 (MX5) (Part B)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
ARC Polymer Composite. When mixed with ARC BX5 (MX5) (Part A), forms a hard abrasion resistant surface. Cures in 15 minutes for fast repairs.
Manufacturers & Suppliers
A.W. CHESTERTON COMPANY
manufacturer
860 Salem Street Groveland, MA 01834-1507, USA
+1 978-469-6446
http://www.chesterton.com
A.W. Chesterton Company Ltd.
distributor
889 Fraser Drive, Unit 105, Burlington, Ontario L7L 4X8
905-335-5055
Chesterton International GmbH
distributor
Am Lenzenfleck 23, D85737 Ismaning, Germany
+49-89-996-5460
Emergency Contacts
Infotrac
1-800-535-5053
24 hours per day, 7 days per week
Infotrac
+1 352-323-3500
24 hours per day, 7 days per week
NSW Poisons Information Centre
13 11 26
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Formaldehyde polymer with 1,3-benzenedimethanamine and phenol EC: 500-137-0 | 57214-10-5 | 10 - 20% | Yes |
| m-Phenylenebis(methylamine) (Synonym: m-Xylene-alpha, alpha'-Diamine) EC: 216-032-5 | 1477-55-0 | 7 - 13% | Yes |
| Nitric Acid, Ammonium Calcium Salt EC: 239-289-5 | 15245-12-2 | 1 - 5% | Yes |
| Ethanol EC: 200-578-6 | 64-17-5 | 1 - 5% | Yes |
| N-(3-(trimethoxysilyl)propyl)ethylenediamine EC: 217-164-6 | 1760-24-3 | 0.1 - 0.9% | Yes |
| Aluminum oxide EC: 215-691-6 | 1302-74-5 | 15 - 40% | No |
| Silicon carbide EC: 206-991-8 | 409-21-2 | 7 - 13% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, administer artificial respiration. Contact physician.
Symptoms: High vapor concentrations may irritate respiratory tract and possibly cause dizziness and drowsiness. Irritation to mucous membranes.
Wash skin with soap and water. Remove contaminated clothing and wash before reuse. Consult physician.
Symptoms: Direct contact will cause severe irritation to skin.
Flush eyes for at least 30 minutes with large amounts of water. Consult physician.
Symptoms: Direct contact will cause severe irritation to eyes. May cause burns to eyes. High vapor concentrations may irritate eyes.
If conscious, do not induce vomiting; drink milk, water or vinegar. Contact physician immediately.
Immediate Medical Attention
Contact physician.
Medical Treatment
Treat symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, dry chemical, foam or water fog
No information available
May generate: ammonia gas, toxic nitrogen oxide gases, Carbon monoxide. Use of water may result in the formation of very toxic aqueous solutions.
Cool exposed containers with water.
Firefighter Protection
Recommend Firefighters wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Utilize exposure controls and personal protection as specified in Section 8.
Cover minor spills with Sodium Bisulfite to neutralize and reduce vapors.
No special requirements.
Scoop up and transfer to a suitable container for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Remove contaminated clothing and wash before reuse. Contaminated leather including shoes cannot be decontaminated and should be discarded. Utilize exposure controls and personal protection as specified in Section 8.
Store in a cool, dry and well-ventilated area.
Remove contaminated clothing and wash before reuse. Contaminated leather including shoes cannot be decontaminated and should be discarded.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide sufficient ventilation to keep the vapor concentrations below the exposure limits. If necessary, provide local exhaust.
Chemical resistant gloves (e.g., butyl rubber or PVC)
Safety goggles.
Not normally needed. If exposure limits are exceeded, use a self-contained breathing apparatus (SCBA), supplied air respirator (SAR) or air-purifying respirator (APR) with a suitable filter (e.g., EN filter type A-P2).
Impervious clothing as necessary to prevent skin contact.
Refer to sections 6 and 12.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Refer to sections 10.3 and 10.5.
No dangerous reactions known under conditions of normal use.
Open flames and high temperatures.
Strong oxidizers like liquid Chlorine and concentrated Oxygen.
Carbon Monoxide, Carbon Dioxide, NOx, Ammonia and other toxic fumes (by combustion).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Formaldehyde polymer with 1,3-benzenedimethanamine and phenol)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ARC BX5 (MX5) (Part B)?
The signal word is danger.
What is the physical form of ARC BX5 (MX5) (Part B)?
ARC BX5 (MX5) (Part B) is a viscous paste with red brown color. It has amine odor.
What is ARC BX5 (MX5) (Part B) used for?
ARC Polymer Composite. When mixed with ARC BX5 (MX5) (Part A), forms a hard abrasion resistant surface. Cures in 15 minutes for fast repairs.
What are the hazard statements for ARC BX5 (MX5) (Part B)?
This substance has 5 hazard statements:
- H227: Combustible liquid.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of ARC BX5 (MX5) (Part B)?
The melting point is not determined and the boiling point is not determined.