Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LC-SCID&SMA-QPCR-FLEX
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
In Vitro Diagnostic use only
Manufacturers & Suppliers
LaCAR MDx technologies
manufacturer
Liège Science Park, Rue des Chasseurs Ardennais,10, 4031 Liège, Belgium
+32 (0) 4 287 39 44
Emergency Contacts
Emergency Contact
+1 703 527 3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| NaOH EC: 215-185-5 | 1310-73-2 | 0.2% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Get medical attention if any discomfort occurs.
Wash contact areas with soap and water. Get medical attention if irritation develops or persists.
Immediately flush eyes with plenty of water for at least 15 minutes. If irritation occurs, get medical assistance.
Rinse mouth thoroughly with water and give large amounts of mil or water, if the person is conscious. Never give anything mouth to an unconscious person. Get medical attention if any discomfort continues.
Medical Treatment
First aid, symptomatic treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide (CO2).
There are no common extinguishing agents inappropriate.
no hazardous combustion products are contained in the mixture.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation and contact with skin and eyes. Wear appropriate protective equipment and clothing during clean-up.
Prevent further leakage or spillage if safe to do so.
Flush the place of release abundantly with running water and wash away into sewer if permitted or absorb with blotting paper and throw in a container provided for waste.
Materials: blotting paper
Related Products
Similar products with comparable safety profiles
Liquichek™ Immunoassay Plus Control, Level 1
---
HSV 1 & 2 PCR Mix
---
GIARIDA/CRYPTOSPORIDIUM QUIK CHEK
---
Allplex™ HPV28 Detection
---
TaqMan Gene Expression Assay, INV, S
---
Allplex™ GI-EB Screening Assay
---
CMV IgG Elecsys cobas e 100
---
Products Containing FLEX Antibody Diluent
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation and contact with skin or eyes. Wear approved safety gloves. Observe good laboratory hygiene practices.
Store in closed original container. Keep container tightly closed.
Observe good laboratory hygiene practices.
General measures of preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Work in well-ventilated rooms.
Use gloves when handling solutions. Substances contained in the product have no effect on the gloves. Wearing gloves is mainly to prevent contamination from operator to the product. Gloves used by LaCAR have the following characteristics: 1. Glove material: Nitrile 2. Glove thickness (cuff): 0.09 mm 3. Glove thickness (finger): 0.18 mm 4. Breakthrough time: >30 min
Wear goggles
lab coat
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
No data available
Exothermic reaction with: acids. Violent reactions possible with: Aluminum, metals, ammonium compounds, nitriles, nitrogen derivative, organic substances, phenols, strong acids
No data available
Various plastics, metals, aluminum, zinc, tin. Rejection of flammable materials with light metals (by virtue of the release of hydrogen in an acid/alkaline environment)
In the event of fire: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1824
- Shipping Name
- Sodium Hydroxide Solution
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LC-SCID&SMA-QPCR-FLEX?
The signal word is danger.
What is the physical form of LC-SCID&SMA-QPCR-FLEX?
LC-SCID&SMA-QPCR-FLEX is a liquid with colorless color. It has odorless odor.
What is the solubility of LC-SCID&SMA-QPCR-FLEX?
At 20°C soluble
What is LC-SCID&SMA-QPCR-FLEX used for?
In Vitro Diagnostic use only
What are the hazard statements for LC-SCID&SMA-QPCR-FLEX?
This substance has 1 hazard statement:
- H314: Causes severe skin burns and eye damage
What is the melting point of LC-SCID&SMA-QPCR-FLEX?
The melting point is Melting point: 9°C .