Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TaqMan Gene Expression Assay, INV, S
- Product Code
- 4331182
- Chemical Name
- Not Applicable
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Formamide : 01-2119496064-35-XXXX
Identified Uses
For research use only. SU22 - Professional uses: Public domain (administration, education, entertainment, services, craftsmen), PROC15 - Use as laboratory reagent, PC21 - Laboratory chemicals, SU24 - Scientific research and development
Uses advised against
Not for consumer use.
Manufacturers & Suppliers
LIFE TECHNOLOGIES EUROPE BV
manufacturer
KWARTSWEG 2, 2665 NN BLEISWIJK, NETHERLANDS
31-(0)180 392 400
Life Technologies Limited
manufacturer
3 Fountain Drive, Inchinnan Business Park, Paisley, PA4 9RF, UK
+44 (0)141 814 6100
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
+1 703-527-3887
CHEMTREC
+1 703-741-5970
CHEMTREC Ireland (Dublin)
+(353)-19014670
EN, GA
CHEMTREC UK (London)
+(44)-870-8200418
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Formamide EC: 200-842-0 | 75-12-7 | 0.23% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration. If symptoms persist, call a doctor.
Wash off immediately with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Immediate medical attention is required.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Immediate medical attention is required.
Never give anything by mouth to an unconscious person. Do not induce vomiting without medical advice. If swallowed, rinse mouth with water (only if the person is conscious). Risk of serious damage to the lungs (by aspiration). Get medical attention if symptoms occur.
Immediate Medical Attention
Immediate medical attention is required for skin and eye contact. IF exposed or concerned: Get medical advice/attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Dry chemical. Carbon dioxide (CO2). Water spray.
No information available.
Not known.
Firefighter Protection
Wear self-contained breathing apparatus and protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Should not be released into the environment.
Sweep up and shovel into suitable containers for disposal.
Related Products
Similar products with comparable safety profiles
High Sensitivity RNA ScreenTape
---
HPV 11 mRNA Probe
---
3MTM AttestTM Rapid Readout Biological Indicators 1291(Flash),1292 & 1292-S
---
HPV 18 mRNA Probe
---
ProteaseTag® Active Neutrophil Elastase Immunoassay Product
---
HPV 16 mRNA Probe
---
3M™ Attest™ Super Rapid Readout Biological Indicator 1491 & 1492V
---
HPV 6 mRNA Probe
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Always wear recommended Personal Protective Equipment. Wash hands before breaks and immediately after handling the product. Do not get in eyes, on skin, or on clothing. Avoid breathing vapours or mists. If during normal use the material presents a respiratory hazard, use adequate ventilation and/or wear appropriate respirator.
Keep in properly labelled containers. Keep in a dry, cool and well-ventilated place. Store in accordance with local regulations.
Wash hands before breaks and immediately after handling the product.
Keep away from combustible material.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas.
Glove material.: Nitrile rubber. with thickness (mm). :5. Break through time. (hours). :>1. Recommended glove type has not been tested for use with this product. Information is based on professional knowledge.
Tight sealing safety goggles.
In case of insufficient ventilation wear respirators and components tested and approved under appropriate government standards.
Wear laboratory coat for body protection.
No special environmental precautions required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known.
Hazardous reaction has not been reported.
High temperature. Thermal decomposition of the finish can take place above (>140 °C) >284 °C.
oxidising agents. Acids. Bases. Sulphur trioxide. Iodine.
Carbon monoxide. Hydrogen cyanide (hydrocyanic acid). Nitrogen oxides (NOx).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The generation of waste should be avoided or minimized wherever possible.
Disposal of this product, its solutions or of any by-products, shall comply with the requirements of all applicable local, regional or national/federal regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not Applicable
- Shipping Name
- Not Applicable
- Transport Class
- Not Applicable
- Packing Group
- Not Applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TaqMan Gene Expression Assay, INV, S?
The signal word is danger.
What is the physical form of TaqMan Gene Expression Assay, INV, S?
TaqMan Gene Expression Assay, INV, S is a liquid appearing as liquid . It has mixture has not been tested odor.
What is the solubility of TaqMan Gene Expression Assay, INV, S?
Soluble in water
What is TaqMan Gene Expression Assay, INV, S used for?
For research use only. SU22 - Professional uses: Public domain (administration, education, entertainment, services, craftsmen), PROC15 - Use as laboratory reagent, PC21 - Laboratory chemicals, SU24 - Scientific research and development
What are the hazard statements for TaqMan Gene Expression Assay, INV, S?
This substance has 3 hazard statements:
- H351: Suspected of causing cancer if swallowed
- H360: May damage fertility or the unborn child if swallowed
- H373: May cause damage to organs through prolonged or repeated exposure
What is the melting point of TaqMan Gene Expression Assay, INV, S?
The melting point is Mixture has not been tested and the boiling point is Mixture has not been tested.