Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- STAIN BLASTER MULTI-PURPOSE
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laundry product
Uses advised against
Reserved for industrial and professional use.
Manufacturers & Suppliers
Ecolab Inc.
manufacturer
1 Ecolab Place St. Paul, Minnesota USA 55102
1-800-352-5326
Emergency Contacts
Emergency Contact
1-800-328-0026
Emergency Contact
1-651-222-5352
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Propylene glycol | 57-55-6 | 10 - 30% | No |
| alcohols, c12-16, ethoxylated >5EO | 68551-12-2 | 10 - 30% | No |
| Potassium Dodecylbenzenesulphonate | 27177-77-1 | 5 - 10% | No |
| fatty acids, tall-oil, compds. with triethanolamine | 68132-46-7 | 5 - 10% | No |
| Soap | 61790-64-5 | 5 - 10% | No |
| triethanolamine | 102-71-6 | 5 - 10% | No |
| Fattyalcohol ethoxylates > C15 and =/< 5EO | 160875-66-1 | 1 - 5% | No |
| Dodecylbenzenesulphonic acid, compound with 2,2',2''-nitrilotriethanol (1:1) | 27323-41-7 | 1 - 5% | No |
| Limonene | 5989-27-5 | 1 - 5% | No |
| distillates (petroleum), hydrotreated light | 64742-47-8 | 10 - 30% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Treat symptomatically. Get medical attention if symptoms occur.
Wash off immediately with plenty of water for at least 15 minutes. Use a mild soap if available. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention immediately.
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Symptoms: Aspiration hazard if swallowed - can enter lungs and cause damage.
Immediate Medical Attention
Get medical attention immediately for eye contact and ingestion. Get medical attention for skin contact. Get medical attention if symptoms occur for inhalation.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
None known.
Not flammable or combustible.
In the event of fire and/or explosion do not breathe fumes.
Firefighter Protection
Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep people away from and upwind of spill/leak. Stop leak if safe to do so.
dike spilled material or otherwise contain material to ensure runoff does not reach a waterway
Do not allow contact with soil, surface or ground water.
collect with non-combustible absorbent material
Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
TASKI Tapi Stain Remover 1
UFI: PMEH-D1EU-Y00R-AUYV
TASKI Tapi Stain Remover 2
UFI: YTFH-G13E-800P-KN4S
SUMA MULTI D2 All Purpose Cleaner
---
STAINLESS STEEL CLEANER & POLISH
---
CARBOL FUCHSIN DILUTE STAINING SOLUTION
---
BONDERITE S-MA 2247 PAINT STRIPPER
---
PP MP10 MULTI PURPOSE CLEANER
---
CLEANING BLEACH
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not get in eyes, on skin, or on clothing. Wash hands thoroughly after handling. In case of mechanical malfunction, or if in contact with unknown dilution of product, wear full Personal Protective Equipment (PPE).
Keep out of reach of children. Store in suitable labeled containers.
Wash hands thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
No dangerous reaction known under conditions of normal use.
None known.
Acids
In case of fire hazardous decomposition products may be produced such as: Carbon oxides, Nitrogen oxides (NOx), Sulfur oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for STAIN BLASTER MULTI-PURPOSE?
The signal word is danger.
What is the physical form of STAIN BLASTER MULTI-PURPOSE?
STAIN BLASTER MULTI-PURPOSE is a liquid appearing as liquid with clear, off-white color. It has citrus odor.
What is STAIN BLASTER MULTI-PURPOSE used for?
Laundry product
What are the hazard statements for STAIN BLASTER MULTI-PURPOSE?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.