Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 4-ADPA
- Product Code
- P3408603
- Chemical Name
- 4-Aminodiphenylamine
Regulatory Identifiers
- CAS Number
- 101-54-2 Check regulations →
- REACH No.
- 01-2119486402-39-0000
Identified Uses
Chemical intermediate, Monomer
Uses advised against
None known.
Manufacturers & Suppliers
Flexsys Chemicals Belgium NV
manufacturer
Scheldelaan 460, Haven 627 2040 Antwerpen
http://www.FLEXSYS.com
Emergency Contacts
CHEMTREC
+1 703-741-5970
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Substance name : 4-Aminodiphenylamine CAS-No. : 101-54-2
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N-(4-aminophenyl)aniline EC: 202-951-9 | 101-54-2 | 90 - 100% | No |
Notes
Flexsys is committed to the safety, health and environment of our employees, our customers, and the communities we operate within. As part of this commitment, Flexsys' Safety Data Sheets (SDS) are prepared in accordance with all applicable national and local regulations. The compositions of our documents reflect these requirements which include, but are not limited to, requirements under the Globally Harmonized System of Classification and Labeling (GHS). These compositions commonly involve the use of ranges versus specific analytical values. If you require a composition that is more specific , please refer to the Certificate of Analysis, sales specification, or contact your Customer Service Representative.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Wash off with soap and water. Wash contaminated clothing before re-use. Thoroughly clean shoes before reuse.
Symptoms: Rash, May cause an allergic skin reaction.
Remove contact lenses, if present and easy to do. Continue rinsing.
Symptoms: Causes eye irritation.
Immediate Medical Attention
If symptoms persist, call a physician. Get medical attention if symptoms occur. If eye irritation persists: Get medical advice/ attention. Seek medical advice.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Dry chemical, Water spray
Do not use a solid water stream as it may scatter and spread fire. Do NOT use water jet.
None known.
Firefighter Protection
Wear an approved positive pressure self-contained breathing for firefighters apparatus in addition to standard fire fighting gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear appropriate personal protective equipment.
Avoid release to the environment.
Sweep up or vacuum up spillage and collect in suitable container for disposal.
Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid breathing dust. Do not get in eyes. Avoid contact with skin, eyes and clothing. Do not swallow. Ensure adequate ventilation. Wash thoroughly after handling.
Keep tightly closed.
Handle in accordance with good industrial hygiene and safety practice. Wash thoroughly after handling.
None known.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Good general ventilation (typically 10 air changes per hour) should be sufficient to control airborne levels. Ensure adequate ventilation.
Wear suitable gloves.
Wear safety glasses with side shields (or goggles). Face-shield Always wear eye protection when the potential for inadvertent eye contact with the product cannot be excluded.
Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None reasonably foreseeable.
None known.
None known.
Strong oxidizing agents
Carbon dioxide (CO2) Carbon monoxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
The product is inherently biodegradable. Biochemical Oxygen Demand (BOD) and Chemical Oxygen Demand (COD) data are not available.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.6 Endocrine disrupting properties
The substance/mixture does not contain components considered to have endocrine disrupting properties at levels of 0.1% or higher.
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations.
Dispose of in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3257
- Shipping Name
- ELEVATED TEMPERATURE LIQUID, N.O.S. (4-Aminodiphenylamine)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Take note of Directive 94/33/EC on the protection of young people at work or stricter national regulations, where applicable.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 4-ADPA?
The signal word is warning.
What is the physical form of 4-ADPA?
4-ADPA is a molten with dark blue color. It has aromatic odor.
What is 4-ADPA used for?
Chemical intermediate, Monomer
What are the hazard statements for 4-ADPA?
This substance has 4 hazard statements:
- H302: Harmful if swallowed.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of 4-ADPA?
The melting point is 70 - 76 °C and the boiling point is 354 °C (1.013 hPa).