Frostox® HT12

If inhaled, remove to fresh air. Get medical attention if symptoms occur.

Wash with water and soap as a precaution. Get medical attention if symptoms occur.

Flush eyes with water as a precaution. Get medical attention if irritation develops and persists.

If swallowed, DO NOT induce vomiting unless directed to do so by medical personnel. Get medical attention. Rinse mouth thoroughly with water. Never give anything by mouth to an unconscious person.

Symptoms: Harmful if swallowed.

Water spray, Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical

None known.

Exposure to combustion products may be a hazard to health.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray to cool unopened containers. Remove undamaged containers from fire area if it is safe to do so.

Use personal protective equipment. Follow safe handling advice and personal protective equipment recommendations.

For large spills, provide dyking or other appropriate containment to keep material from spreading. If dyked material can be pumped, store recovered material in appropriate container.

Discharge into the environment must be avoided. Prevent further leakage or spillage if safe to do so.

Soak up with inert absorbent material. Clean up remaining materials from spill with suitable absorbent.

Materials: inert absorbent material, suitable absorbent

Avoid inhalation of vapour or mist. Do not swallow. Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Handle in accordance with good industrial hygiene and safety practice, based on the results of the workplace exposure assessment

Keep in properly labelled containers. Store in accordance with the particular national regulations. Keep in a dry place.

Ensure that eye flushing systems and safety showers are located close to the working place. When using do not eat, drink or smoke. Wash contaminated clothing before re-use.

Ensure adequate ventilation, especially in confined areas. Minimize workplace exposure concentrations.

Material: butyl-rubber, Break through time: > 30 min, Glove thickness: 0,7 mm, Directive: DIN EN 374, Protective index: Class 2; Material: Nitrile rubber, Break through time: > 30 min, Glove thickness: 0,4 mm, Directive: DIN EN 374, Protective index: Class 2. Remarks: Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work. For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove manufacturer.

Wear the following personal protective equipment: Safety glasses Equipment should conform to DIN EN 166

Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines. Filter type: Combined particulates and organic vapour type (A-P)

Skin should be washed after contact.

Stable under normal conditions.

Not classified as a reactivity hazard.

Can react with strong oxidizing agents.

None known.

Oxidizing agents

No hazardous decomposition products are known.

Dispose of in accordance with local regulations.

According to the European Waste Catalogue, Waste Codes are not product specific, but application specific. Waste codes should be assigned by the user, preferably in discussion with the waste disposal authorities.