Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TYFOCOR® G-LS –ready-to-use, frost protection –28 °C
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
TYFOROP Chemie GmbH
manufacturer
Anton-Rée-Weg 7, D - 22305 Hamburg
++49 (0)40 -20 94 97-0
Emergency Contacts
Emergency Contact
++49-(0)40 -20 94 97-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aqueous solution of propane-1.2-diol with corrosion inhibitors.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| propane-1.2-diol | 57-55-6 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If difficulties occur after vapour/aerosol has been inhaled, remove to fresh air and seek medical attention.
Wash thoroughly with soap and water.
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
Rinse mouth and then drink plenty of water.
Medical Treatment
Symptomatic treatment (decontamination, vital functions)
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The product is non-flammable. Water spray, alcohol-resistant foam, dry extinguishers, and carbon dioxide (CO₂) are suitable for extinguishing environmental fire.
Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For residues: Bind the liquid by using a suitable absorbent material and dispose of in accordance with the regulations.
For large amounts: Pump off product.
Contain contaminated water/fire fighting water. Do not discharge into natural waters without pretreatment (biological treatment plant).
Pump off product. Bind the liquid by using a suitable absorbent material and dispose of in accordance with the regulations. Wash away spills thoroughly with large quantities of water.
Materials: suitable absorbent material
Related Products
Similar products with comparable safety profiles
Kilfrost Cooltrans Plus CTL
---
Antifreeze/Coolant HT-FVA
UFI: DEX5-QFEF-A100-06EK
FERROCOTE™ 5856 BF T1
---
TEFROLITH® FTG-35 Additive Emulsion
---
MPM Coolant Premium Longlife -40°C G13 Ready to Use
UFI: QSKQ-5GAP-320Q-7KES
Provifrost KF ECO
CAS: 590-29-4
METAFLUX 70-3500 ROST-I-SOL®-Spray
---
GLYFOS HERBICIDE
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No specific measures necessary.
Containers should be stored tightly sealed in a dry place.
No specific measures necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant protective gloves (EN 374). Recommended: nitrile rubber, protective index 6. Manufacturers directions for use should be observed because of great diversity of types.
Safety glasses with side-shields (frame goggles, EN 166)
Respiratory protection in case of release of fumes/fog.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No hazardous reactions if stored and handled as prescribed.
Powerful oxidizing agents.
No hazardous decomposition products if stored and handled as prescribed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
TYFOCOR® G-LS must be dumped or incinerated in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Not subject to labelling.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TYFOCOR® G-LS –ready-to-use, frost protection –28 °C?
The signal word is no signal word.
What is the physical form of TYFOCOR® G-LS –ready-to-use, frost protection –28 °C?
TYFOCOR® G-LS –ready-to-use, frost protection –28 °C is a liquid. with violet. color. It has product specific. odor.
What is the solubility of TYFOCOR® G-LS –ready-to-use, frost protection –28 °C?
soluble in polar solvents.