NextSDS Logo
Safety Data Sheet EN

WD-40 Specialist™ Silicone Long-Lasting Lubrication

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
WD-40 Specialist™ Silicone Long-Lasting Lubrication

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaner, Lubricant

Uses advised against

None identified

Manufacturers & Suppliers

W

WD-40 Company

manufacturer

9715 Businesspark Avenue San Diego, California, USA 92131

Emergency Contacts

Emergency Contact

1-888-324-7596

Chemtrec

1-800-424-9300

Emergency Contact

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1
Asp. Tox. Cat. 1

GHS Pictograms

GHS02 - Flammable

GHS02

GHS08 - Serious health hazard

GHS08

Hazard Statements

H222 Extremely Flammable Aerosol.
H304 May be fatal if swallowed and enters airways.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition source. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or physician.
P331 Do NOT induce vomiting.
P405 Store locked up.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
P501 Dispose of contents and container in accordance with local and national regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
LVP Petroleum Solvent 64742-47-8 60 - 80% Yes
Propellant (propane, n-butane) --- 10 - 30% Yes
Poly(dimethylsiloxane) 63148-62-9 1 - 5% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If irritation is experienced, move to fresh air. Get medical attention if irritation or other symptoms develop and persist.

Symptoms: May cause respiratory irritation. Inhalation may cause coughing, headache and dizziness.

Skin contact

Wash with soap and water. If irritation develops and persists, get medical attention.

Symptoms: Skin contact may cause drying of the skin.

Eye contact

Flush thoroughly with water. Remove contact lenses if present after the first 5 minutes and continue flushing for several more minutes. Get medical attention if irritation persists.

Symptoms: May cause eye irritation.

Ingestion

Aspiration Hazard. Call physician, poison control center or the WD-40 Safety Hotline at 1-888-324-7596 immediately.

Symptoms: Harmful or fatal is swallowed. If swallowed, may be aspirated and cause lung damage.

Immediate Medical Attention

Immediate medical attention is needed for ingestion.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water fog, dry chemical, carbon dioxide or foam.

Unsuitable media

Do not use water jet or flooding amounts of water.

Specific hazards

Extremely Flammable aerosol. Contents under pressure. Keep away from ignition sources and open flames. Exposure of containers to extreme heat and flames can cause them to rupture often with violent force. A vapor and air mixture can create an explosion hazard in confined spaces.

Instructions

Cool fire-exposed containers with water. Use shielding to protect against bursting containers.

Firefighter Protection

Firefighters should always wear positive pressure self-contained breathing apparatus and full protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear appropriate protective clothing (see Section 8). Eliminate all sources of ignition and ventilate area.

Cleanup methods

Clean spill area thoroughly.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes. Avoid prolonged contact with skin. Avoid breathing vapors or aerosols. Use only with adequate ventilation. Keep away from heat, sparks, pilot lights, hot surfaces and open flames. Unplug electrical tools, motors and appliances before spraying or bringing the can near any source of electricity. Electricity can burn a hole in the can and cause contents to burst into flames. To avoid serious burn injury, do not let the can touch battery terminals, electrical connections on motors or appliances or any other source of electricity. Wash thoroughly with soap and water after handling. Keep containers closed when not in use. Keep out of the reach of children. Do not puncture, crush or incinerate containers, even when empty.

Storage

Store in a cool, well-ventilated area, away from incompatible materials. Do not store above 120°F or in direct sunlight.

Hygiene

Wash thoroughly with soap and water after handling.

Fire prevention

Keep away from heat, sparks, pilot lights, hot surfaces and open flames. Unplug electrical tools, motors and appliances before spraying or bringing the can near any source of electricity.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Colorless
Colour Intensity
---
Form
---
Odor
Mild petroleum odor
Odor Threshold
---
Ph
Not Applicable
Melting Point
Not established
Boiling Point
221°C (430°F)
Flash Point
<-30°C (-22°F) (CC ASTM D3828)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
0.07 mmHg @25°C
Vapor Density
---
Relative Density
Not Determined
Bulk Density
---
Density
---
Flammability
Flammable Aerosol
Upper Explosive Limit
UEL: 5.0%
Lower Explosive Limit
LEL: 0.6%
Explosive Limits
---
Auto Ignition Temperature
Not established
Decomposition Temperature
Not established
Solubility
---
Partition Coefficient
Not established
Solubility In Water
Insoluble in water
Solubility In Fat
---
Molecular Weight
---
Voc Content
20%
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
Not established
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Reactivity

Not reactive under normal conditions

Hazardous reactions

May react with strong oxidizers generating heat.

Avoid

Avoid heat, sparks, flames and other sources of ignition. Do not puncture or incinerate containers.

Incompatible

Strong acids, alkalis, and oxidizers.

Decomposition

Carbon monoxide and carbon dioxide, oxides of nitrogen and sulfur, smoke, fumes, and/or unburned hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Ecotoxicity

No specific aquatic toxicity data is currently available; however components of this product are not expected to be harmful to aquatic organisms

No specific aquatic toxicity data is currently available; however components of this product are not expected to be harmful to aquatic organisms

Persistence and Degradability

No data available.

Bioaccumulative Potential

Bioaccumulation is not expected based on an assessment of the ingredients.

Bioaccumulation is not expected based on an assessment of the ingredients.

Mobility in Soil

No data available

Results of PBT and vPvB assessment

Endocrine disrupting properties

Other Adverse Effects

None known
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

It is the responsibility of the generator to determine at the time of disposal the proper classification and method of disposal.

Waste Codes

D001 ignitable hazardous waste RCRA
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
Aerosols
Transport Class
2.1
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Regulatory information for the product, including US federal compliance (TSCA, SARA, CERCLA) and Canadian inventory status.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for WD-40 Specialist™ Silicone Long-Lasting Lubrication?

The signal word is danger.

What is the physical form of WD-40 Specialist™ Silicone Long-Lasting Lubrication?

WD-40 Specialist™ Silicone Long-Lasting Lubrication is a liquid with colorless color. It has mild petroleum odor odor.

What is WD-40 Specialist™ Silicone Long-Lasting Lubrication used for?

Cleaner, Lubricant

What are the hazard statements for WD-40 Specialist™ Silicone Long-Lasting Lubrication?

This substance has 2 hazard statements:

  • H222: Extremely Flammable Aerosol.
  • H304: May be fatal if swallowed and enters airways.

What is the melting point of WD-40 Specialist™ Silicone Long-Lasting Lubrication?

The melting point is Not established and the boiling point is 221°C (430°F).