ADDITIVES PACKAGE PXL 5003

Remove injured person to fresh air, loosen its clothing and place it in a comfortable position. If necessary, administer artificial respiration. In case of complaints, obtain medical help.

Remove contaminated clothing. Wash contaminated area thoroughly with running water and soap. In case of complaints, obtain medical help.

Flush eyes with water, holding the eyelids apart and moving eyeballs (for at least 15 minutes). Immediately call a POISON CENTER or doctor/physician.

Do not induce vomiting without previous medical advice. Place the victim into a comfortable position. Never give anything by mouth to an unconscious person, do not induce vomiting. In case of spontaneous vomiting, keep the head down the head of the injured person. IF exposed or concerned: Get medical advice/attention.

Foam, dry chemical, carbon dioxide.

Do not use a water jet because it may scatter and spread fire.

The generation of hazardous combustion products depends largely on the circumstances of combustion. It may for a complex mixture of solid, liquid and gaseous substances, such as carbon monoxide, carbon dioxide, oxides of phosphorus, oxides of sulphur and other unidentified chemical mixtures. Inhalation of vapours formed during the fire and inhalation of combustion products can cause serious health problems.

Standard procedure for chemical fires. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Fire-fighters should exercise extreme caution in enclosed spaces due to the possible presence of toxic decomposition and combustion products.

Keep unprotected people away, allow only well trained experts wearing suitable protective clothing to abide in the field of accident. Avoid contact with eyes, skin and clothing. Prevent unauthorised access.

The product discharged into the environment or the waste resulting from their use to be treated according to regulations on environmental protection.

Absorb spilled product with non-combustible absorbent and place the waste into a closed, properly labelled hazardous waste container till disposal.

Materials: non-combustible absorbent (e.g.: sand, earth)

Observe basic hygiene measures. Avoid contact with eyes, skin and clothing. Do not put soaked rags into the pocket of work clothes. Remove contaminated clothing. Keep away from food, drink and feed. Do not eat, drink or smoke when using the product. Wash hands before breaks and after work.

Product should be stored below the recommended maximum loading / unloading temperature to avoid degradation of product quality and eventually decomposition.

Wash hands before breaks and after work. Do not eat, drink or smoke when using the product. Keep away from food, drink and feed.

Follow preventive measures. Take precautions against static discharge.

Ensure adequate ventilation.

Use appropriate oil resistant protective gloves (made of PVC or nitrile rubber, EN 374 and EN 420). Replace protective gloves at the first sign of wear.

Use appropriate eye protection with side shields to prevent eye contact (EN 166).

normally not necessary. In case of formation of spray or vapours, or in case of frequent or intensive exposure, use an appropriate respiratory protection (EN 140, EN 141).

Protective clothing (antistatic) adequate to avoid contact of the product with the skin.

No specific instructions.

The product is stable within normal conditions of use and storage.

No data available.

Within normal conditions no hazardous reactions are expected.

Avoid high temperatures over 50 °C or sources of ignition. Avoid contact with water and moisture.

Explosive substances, compressed, liquefied or pressurized gases, flammable substances or strong oxidizing substances.

No decomposition within normal conditions of use.

Disposal has to be performed according to the local/national regulations in force.

The waste product should be treated as hazardous waste and handed over to authorized collection points under the legislation in force.