Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- HyVolt SE
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Dielectric Fluids
Uses advised against
None known.
Manufacturers & Suppliers
Ergon, Inc.
manufacturer
P.O. Box 1639 Jackson, MS 39181 USA
Ergon International, Inc.
distributor
Drève Richelle 161 Building C B-1410 Waterloo, Belgium
Emergency Contacts
US Customer Service
+ 1-800-222-7122
Chemtrec
+ 1-800-424-9300
Chemtrec
+ 1-703-527.-3887
Emergency Contact
+32-28083237
Emergency Contact
+33-975181407
Emergency Contact
+49-69643508409
Emergency Contact
+39-0245557031
Emergency Contact
+34-931768545
Poison Centre (Centre Antipoisons - Belgium)
+32022649636
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| FATTY ACID TET A ESTERS | --- | 99.5% | No |
| PROPRIETARY | --- | 0.5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. For breathing difficulties, oxygen may be necessary. Call a physician if symptoms develop or persist.
Wash off with soap and water. Take off contaminated clothing and wash before reuse. Get medical attention if irritation develops and persists.
Symptoms: Mild skin irritation.
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Symptoms: Direct contact with eyes may cause temporary irritation.
Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Get medical attention if symptoms occur.
Immediate Medical Attention
Call a physician if symptoms develop or persist.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Do not use water jet as an extinguisher, as this will spread the fire.
During fire, gases hazardous to health may be formed.
Move containers from fire area if you can do so without risk. Use standard firefighting procedures and consider the hazards of other involved materials.
Firefighter Protection
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear appropriate personal protective equipment. Keep unnecessary personnel away.
Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination. Never return spills to original containers for re-use.
Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Absorb in vermiculite, dry sand or earth and place into containers.
Avoid discharge into drains, water courses or onto the ground.
Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water.
Materials: vermiculite, dry sand or earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe good industrial hygiene practices.
Store in tightly closed container.
Observe good industrial hygiene practices.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation, including appropriate local extraction, to ensure that the defined occupational exposure limit is not exceeded.
Wear appropriate chemical resistant gloves.
Wear safety glasses with side shields (or goggles).
In case of insufficient ventilation, wear suitable respiratory equipment.
Wear suitable protective clothing.
Environmental manager must be informed of all major releases.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
The product is stable and non-reactive under normal conditions of use, storage and transport.
No dangerous reaction known under conditions of normal use.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Contact with incompatible materials.
Strong oxidizing agents.
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.2. Persistence and degradability
No data is available on the degradability of any ingredients in the mixture.
12.3. Bioaccumulative potential
Partition coefficient n-octanol/water (log Kow) is > 10.
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Endocrine disrupting properties
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations.
Collect and reclaim or dispose in sealed containers at licensed waste disposal site.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is classified and labelled in accordance with Regulation (EC) 1272/2008 (CLP Regulation) as amended. This Safety Data Sheet complies with the requirements of Regulation (EU) 2020/878.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for HyVolt SE?
The signal word is no signal word.
What is the physical form of HyVolt SE?
HyVolt SE is a liquid. with colorless to slight yellow tint color. It has not available. odor.
What is HyVolt SE used for?
Dielectric Fluids
What are the hazard statements for HyVolt SE?
This substance has 1 hazard statement:
- The mixture does not meet the criteria for classification.
What is the melting point of HyVolt SE?
The melting point is -67 °F (-55 °C) and the boiling point is >572 °F (>300 °C).