Infineum R511

Move to fresh air. Consult a physician after significant exposure.

Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician. In case of burns apply cold water until pain subsides then seek medical advice.

Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.

Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Obtain medical attention.

Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames

Combustible.

Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Avoid contact with spilled material. Do not touch or walk through spilled material.

Dyke far ahead of liquid spill for later recovery and disposal.

Prevent entry into waterways, sewers, basements or confined areas. Do not flush into surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so.

Recover by pumping or with suitable absorbent. Seek the advice of a specialist before using dispersants.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations. Take precautionary measures against static discharges. Ensure all equipment is electrically grounded before beginning transfer operations. Normal measures for preventive fire protection.

Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. No decomposition if stored and applied as directed.

Smoking, eating and drinking should be prohibited in the application area.

Normal measures for preventive fire protection.

No special requirements under ordinary conditions of use and with adequate ventilation.

Solvent-resistant gloves. Before removing gloves clean them with soap and water. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. When handling hot material, use heat resistant gloves. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Eye wash bottle with pure water. Tightly fitting safety goggles.

In the case of vapour formation use a respirator with an approved filter.

impervious clothing. Choose body protection according to the amount and concentration of the dangerous substance at the work place. Long sleeved clothing.

Prevent entry into waterways, sewers, basements or confined areas. Do not flush into surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.

Stable under normal conditions.

Elevated temperatures. Open flames and high energy ignition sources.

Strong oxidizing agents

The product should not be allowed to enter drains, water courses or the soil.

Offer surplus and non-recyclable solutions to a licensed disposal company.