NextSDS Logo
Safety Data Sheet EN

Infineum R441T

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Infineum R441T
Product Code
72317

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Additive for petroleum fuels

Uses advised against

This material should not be used for any other purpose than that recommended without expert advice.

Manufacturers & Suppliers

INFINEUM NETHERLANDS B.V. logo

INFINEUM NETHERLANDS B.V.

manufacturer

Herikerbergweg 238 Luna Arena 1101 CM Amsterdam The Netherlands

+44 1235 549501

http://www.infineum.com

Emergency Contacts

Emergency Contact

04-4274.4690

Emergency Contact

+33-4.4274.4690

Emergency Contact

0221-7499 3355

Emergency Contact

+49-221-7499 3355

Emergency Contact

019-2150 221

Emergency Contact

+39 019-2150 221

Emergency Contact

01235 549777

Emergency Contact

+44 1235 549777

Emergency Contact

070 245 245

Emergency Contact

+32 70 245 245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318
Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 1 H410

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS09 - Environmental hazard

GHS09

Hazard Statements

H315 Causes skin irritation.
H318 Causes serious eye damage.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P264 Wash skin thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves/ eye protection/ face protection.
P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.
P391 Collect spillage.
P501 Dispose of contents/ container to an approved waste disposal plant.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
2,4-di-tert-butylphenol EC: 202-532-0 --- 30 - 50% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Consult a physician after significant exposure. If unconscious place in recovery position and seek medical advice.

Skin contact

Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician. In case of burns apply cold water until pain subsides then seek medical advice.

Eye contact

In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists: Get medical advice/ attention.

Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness.

Ingestion

Clean mouth with water and drink afterwards plenty of water. Do NOT induce vomiting. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. Take victim immediately to hospital.

Immediate Medical Attention

Consult a physician after significant exposure. If symptoms persist, call a physician. In case of burns seek medical advice. If eye irritation persists: Get medical advice/ attention. Take victim immediately to hospital.

Medical Treatment

Show this safety data sheet to the doctor in attendance.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames

Unsuitable media

High volume water jet

Specific hazards

Not classified as flammable or combustible, but will combust if ignited.

Instructions

Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Advice for emergency responders: Ensure adequate ventilation. Use personal protective equipment. Material can create slippery conditions. For personal protection see section 8. Advice for non-emergency personnel: Avoid contact with spilled material. Do not touch or walk through spilled material.

Large spill

Dyke far ahead of liquid spill for later recovery and disposal.

Environmental

Prevent entry into waterways, sewers, basements or confined areas. Prevent further leakage or spillage if safe to do so.

Cleanup methods

Recover by pumping or with suitable absorbent. Seek the advice of a specialist before using dispersants.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with skin and eyes. For personal protection see section 8. Handle and open container with care.

Storage

Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. No decomposition if stored and applied as directed.

Hygiene

Smoking, eating and drinking should be prohibited in the application area.

Fire prevention

Normal measures for preventive fire protection.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
yellow
Colour Intensity
---
Form
viscous
Odor
No information available.
Odor Threshold
not determined
Ph
Not applicable
Melting Point
not determined
Boiling Point
not determined
Flash Point
134 °C (273 °F) Method: Pensky-Martens Closed Cup (ASTM D93)
Freezing Point
not determined
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not applicable
Vapor Pressure
< 0,1 hPa (< 0,1 mmHg) at 20 °C (68 °F) estimated
Vapor Density
not determined
Relative Density
not determined
Bulk Density
Not applicable
Density
0,912 g/cm³ at 15 °C (59 °F) Method: Calculated
Flammability
not determined
Upper Explosive Limit
not determined
Lower Explosive Limit
not determined
Explosive Limits
---
Auto Ignition Temperature
Not applicable
Decomposition Temperature
not determined
Solubility
---
Partition Coefficient
not determined
Solubility In Water
< 0,0001 g/l estimated
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
635 mm2/s at 40 °C (104 °F) Method: ASTM D 445; 320 mm2/s at 50 °C (122 °F) Method: ASTM D 445; 176 mm2/s at 60 °C (140 °F) Method: ASTM D 445
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

No dangerous reaction known under conditions of normal use.

Hazardous reactions

No hazards to be specially mentioned.

Avoid

Excessive heat.

Incompatible

Strong oxidizing agents

Decomposition

No decomposition if used as directed.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Product: - Toxicity to fish: No data is available on the product itself. - Toxicity to daphnia and other aquatic invertebrates: No data is available on the product itself. - Toxicity to algae: No data is available on the product itself. Components:

No data is available on the product itself regarding toxicity to fish, daphnia, and algae.

12.1 Toxicity

Toxicity to fish : LC50 : > 1 - 10 mg/l Exposure time: 96 h Very toxic to aquatic life with long lasting effects. Toxicity to daphnia and other aquatic invertebrates : EC50 (Daphnia magna (Water flea)): > 0,1 - 1 mg/l Exposure time: 48 h Test Method: static test Method: OECD Test Guideline 202 Very toxic to aquatic life with long lasting effects. Toxicity to algae : EC50 (Desmodesmus subspicatus (green algae)): > 0,1 - 1 mg/l Exposure time: 72 h Test Method: static test Method: OECD Test Guideline 201 NOEC (Desmodesmus subspicatus (green algae)): 0,073 mg/l Exposure time: 72 h Test Method: static test Method: OECD Test Guideline 201 M-Factor : 1, L(E)C50 >0.1 - 1 mg/l Toxicity to daphnia and other aquatic invertebrates (Chronic toxicity) : NOEC: 0.1 mg/l Exposure time: 21 d Species: Daphnia magna (Water flea) Method: OECD Test Guideline 211

12.2 Persistence and degradability

Product: - Biodegradability: No data is available on the product itself. Components: 2,4-di-tert-butylphenol : Biodegradability : Result: Not inherently biodegradable. Method: OECD Test Guideline 301C

12.3 Bioaccumulative potential

Product: Bioaccumulation : No data is available on the product itself. Partition coefficient: n-octanol/water : not determined Components: 2,4-di-tert-butylphenol :

No data is available on the product itself. Partition coefficient: n-octanol/water is not determined.

12.3 Bioaccumulative potential

Bioaccumulation : Species: Cyprinus carpio (Carp) Exposure time: 56 d Bioconcentration factor (BCF): 436 Method: OECD Test Guideline 305C Can accumulate in aquatic organisms. Partition coefficient: n-octanol/water : log Pow: 4,8

12.4 Mobility in soil

Product: Mobility : No data is available on the product itself. Components: 2,4-di-tert-butylphenol : Mobility : After release, adsorbs onto soil., immobile

12.5 Results of PBT and vPvB assessment

Product: Assessment : No data is available on the product itself. This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Components: 2,4-di-tert-butylphenol : Assessment : This substance is not considered to be persistent, bioaccumulating and toxic (PBT)., This substance is not considered to be very persistent and very bioaccumulating (vPvB).

The product does not contain components classified as PBT or vPvB at levels of 0.1% or higher. The component 2,4-di-tert-butylphenol is not considered PBT or vPvB.

12.6 Other adverse effects

Additional ecological information : None known. Components: 2,4-di-tert-butylphenol : Additional ecological information : None known.

No known other adverse effects for the product or its components.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of contents/ container to an approved waste disposal plant.

Disposal

The product should not be allowed to enter drains, water courses or the soil. Do not contaminate ponds, waterways or ditches with chemical or used container. Disposal must be in accordance with applicable laws and regulations, and material characteristics at time of disposal.

Waste Codes

13 07 XX wastes of liquid fuels EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3082
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.(Alkyl phenol)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Risk classification according to VbF: Exempt

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Infineum R441T?

The signal word is danger.

What is the physical form of Infineum R441T?

Infineum R441T is a liquid with yellow color. It has no information available. odor.

What is Infineum R441T used for?

Additive for petroleum fuels

What are the hazard statements for Infineum R441T?

This substance has 3 hazard statements:

  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.
  • H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of Infineum R441T?

The melting point is not determined and the boiling point is not determined.