Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Infineum R432
- Synonyms
- 32783
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive for petroleum fuels
Uses advised against
This material should not be used for any other purpose than that recommended without expert advice.
Manufacturers & Suppliers
INFINEUM NETHERLANDS B.V.
manufacturer
Herikerbergweg 238 Luna Arena, 1101 CM Amsterdam, The Netherlands
+44 1235 549501
http://www.infineum.com
Emergency Contacts
Emergency Contact
04-4274.4690
Emergency Contact
+33-4.4274.4690
Emergency Contact
0221-7499 3355
Emergency Contact
+49-221-7499 3355
Emergency Contact
019-2150 221
Emergency Contact
+39 019-2150 221
Emergency Contact
01235 549777
Emergency Contact
+44 1235 549777
Emergency Contact
070 245 245
Emergency Contact
+32 70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Alcohols, C9-11-iso-, C10-rich EC: 271-234-0 | --- | 30 - 50% | Yes |
| Hydrocarbons, C10, aromatics, >1% naphthalene | --- | 2.5 - 10% | Yes |
| naphthalene EC: 202-049-5 | --- | 0.25 - 1% | Yes |
| Alcohols, C9-11-iso-, C10-rich EC: 271-234-0 | --- | 30 - 50% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician. In case of burns apply cold water until pain subsides then seek medical advice.
Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists: Get medical advice/ attention.
Clean mouth with water and drink afterwards plenty of water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. Take victim immediately to hospital.
Immediate Medical Attention
Take victim immediately to hospital.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames
High volume water jet
Combustible.
Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. For safety reasons in case of fire, cans should be stored separately in closed containments. Use a water spray to cool fully closed containers.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Exposure to decomposition products may be a hazard to health.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Use personal protective equipment. Material can create slippery conditions. Avoid contact with spilled material. Do not touch or walk through spilled material.
Dyke far ahead of liquid spill for later recovery and disposal. Recover by pumping or with suitable absorbent
Prevent entry into waterways, sewers, basements or confined areas. Prevent further leakage or spillage if safe to do so. Try to prevent the material from entering drains or water courses.
Recover by pumping or with suitable absorbent. Contain spillage, and then collect with non-combustible absorbent material and place in container for disposal. Clean contaminated floors and objects thoroughly while observing environmental regulations.
Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid formation of aerosol. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Do not spray on a naked flame or any incandescent material. Keep away from open flames, hot surfaces and sources of ignition.
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. No decomposition if stored and applied as directed.
Smoking, eating and drinking should be prohibited in the application area.
Take precautionary measures against static discharges. Ensure all equipment is electrically grounded before beginning transfer operations. Do not spray on a naked flame or any incandescent material. Keep away from open flames, hot surfaces and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No dangerous reaction known under conditions of normal use.
Vapours may form explosive mixture with air.
Avoid heat, sparks, open flames and other ignition sources.
Strong oxidizing agents
No decomposition if used as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
No data is available on the product itself.
12.2 Persistence and degradability
12.2 Persistence and degradability
The substance is inherently biodegradable but not readily biodegradable.
Persistence and degradability
Biodegradation: 83 %
Exposure time: 28 d
12.3 Bioaccumulative potential
Partition coefficient: n-octanol/water : not determined Components: Alcohols, C9-11-iso-, C10-rich : | Bioaccumulation | : Exposure time: 16 d Bioconcentration factor (BCF): 21 Bioaccumulation is unlikely. | | Partition coefficient: n-octanol/water | : log Pow: 3,2 |
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The product and its components (Alcohols, C9-11-iso-, C10-rich and Hydrocarbons, C10, aromatics, >1% naphthalene) are not considered to be persistent, bioaccumulative and toxic (PBT) or very persistent and very bioaccumulative (vPvB).
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The product should not be allowed to enter drains, water courses or the soil. Do not contaminate ponds, waterways or ditches with chemical or used container. Dispose of contents/ container to an approved waste disposal plant.
Dispose of contents/ container to an approved waste disposal plant. Disposal must be in accordance with applicable laws and regulations, and material characteristics at time of disposal.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
To import this product into the EU your company requires registrations and/or pre-registrations for all constituent substances that are subject to REACH registration.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Infineum R432 known by?
Infineum R432 is also known as: 32783
What is the hazard signal word for Infineum R432?
The signal word is no signal word.
What is the physical form of Infineum R432?
Infineum R432 is a liquid with amber color. It has hydrocarbon-like odor.
What is Infineum R432 used for?
Additive for petroleum fuels
What are the hazard statements for Infineum R432?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Infineum R432?
The melting point is not determined and the boiling point is not determined.