Pyrolysis oil from plastics and tyres

Remove person to fresh air and keep comfortable for breathing. Get medical attention.

Symptoms: Harmful by inhalation. May cause headache, dizziness, and intoxication.

Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention if irritation persists after washing.

Symptoms: Irritating to skin. May produce an allergic reaction.

Rinse immediately with plenty of water. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention.

Symptoms: Causes serious eye damage.

Do not induce vomiting. If swallowed, rinse mouth with water (only if the person is conscious). Get medical attention immediately.

Symptoms: May cause nausea, intoxication.

Water spray, foam, dry powder or carbon dioxide.

Do not use water jet as an extinguisher, as this will spread the fire.

Extremely flammable liquid and vapour.

Cool containers exposed to heat with water spray and remove them from the fire area if it can be done without risk.

Avoid inhalation of vapours and contact with skin and eyes. Wear adequate protective equipment at all operations.

Absorb spillage with sand or other inert absorbent.

Avoid release to the environment.

Immediately start clean-up of the liquid and contaminated soil.

Do not handle until all safety precautions have been read and understood. Avoid heat, flames and other sources of ignition. Take precautionary measures against static discharges. All handling should only take place in well-ventilated areas. Avoid inhalation of vapours and contact with skin and eyes. Wear protective gloves, eye and face protection. Use personal protective equipment and/or local ventilation when needed.

Store in tightly-closed, original container in a dry, cool and wellventilated place. Protect from sunlight.

Do not eat, drink or smoke when using this product. Wash hands and any other contaminated areas of the body with soap and water before leaving the work site.

Avoid heat, flames and other sources of ignition. Take precautionary measures against static discharges.

All handling should only take place in well-ventilated areas. In case of insufficient ventilation, wear suitable respiratory equipment.

Wear protective gloves. It is recommended that gloves are made of the following material: Nitrile rubber. Polyvinyl alcohol (PVA). The selected gloves should have a breakthrough time of at least 8 hours. Protection class 6. Protective gloves according to standards EN 420 and EN 374. Change protective gloves regularly.

Tight-fitting safety glasses. Face shield when needed.

Filter device/full mask Wear a respirator fitted with the following cartridge: ABEK. Filter device could be used maximum 2 hours at a time. Filter devices must not be used in conditions where the oxygen level is low (< 19 vol.-%). At high concentrations a breathing apparatus must be used (self-contained or fresh air hose breathing apparatus). Filter must be changed often enough. Respirators according standards EN 136 and EN 141.

Protective clothing when needed. Wear anti-static protective clothing if there is a risk of ignition from static electricity.

Take precautions against leakage by constructing collecting pools and sewerage systems as well as by surfacing the loading and unloading stations.

Stable at normal ambient temperatures.

There are no known reactivity hazards associated with this product.

None known.

Keep away from heat, sparks and open flame.

Oxidising agents.

None known.

Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.

Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.

Tunnel restriction code (D/E)