Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- EROL EAP 2368
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
defoamer
Manufacturers & Suppliers
PMC OUVRIE
manufacturer
Rue Albert Einstein, 44, F-62220 CARVIN, France
+33 3 91.83.71.71
Emergency Contacts
ORFILA
+33.(0)1.45.42.59.59
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H -isothiazol-3-one [EC no. 220-239-6] (3:1) | 55965-84-9 | 0.0015% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Call a POISON CENTER/doctor. Allow affected person to breathe fresh air. Allow the victim to rest.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.
Immediately flush eyes thoroughly with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists.
Do NOT induce vomiting. Immediately call a POISON CENTER/doctor. Rinse mouth. Obtain emergency medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide. Water spray. Alcohol resistant foam. Foam. Dry powder. Sand.
Do not use a heavy water stream.
Fire hazard : Not flammable.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with the product. Remove contaminated clothing immediately. Evacuate unnecessary personnel. Ventilate area.
Small quantities of liquid spill: take up in non-combustible absorbent material and shovel into container for disposal. Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Prevent entry to sewers and public waters. Avoid release to the environment.
Small quantities of liquid spill: take up in non-combustible absorbent material and shovel into container for disposal. Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.
Materials: non-combustible absorbent material, inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation. Use personal protective equipment as required. Do not handle until all safety precautions have been read and understood.
Store in dry, cool, well-ventilated area. Protect from frost. Keep only in the original container in a cool, well ventilated place away from : Keep container closed when not in use.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Keep away from open flame or sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Assure a sufficient ventilation of the zones of storages and workplaces.
In case of repeated or prolonged contact wear gloves
Chemical goggles or safety glasses
No special respiratory protection equipment is recommended under normal conditions of use with adequate ventilation
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions. Not established.
No additional information available
No polymerization. Not established.
Extremely high or low temperatures. Direct sunlight.
Oxidizing agent. Strong acids. Strong bases.
In case of fire hazardous decomposition products may be produced such as: Carbon Monoxide, Carbon Dioxide (CO2), fume. Carbon monoxide. Carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
12.2. Persistence and degradability
12.3. Bioaccumulative potential
No additional information available
12.4. Mobility in soil
No additional information available
12.5. Results of PBT and vPvB assessment
No additional information available
12.6. Endocrine disrupting properties
No additional information available
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in a safe manner in accordance with local/national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Contains no substance(s) listed on the REACH Annex XVII, REACH Annex XIV, REACH Candidate List, PIC list, POP list, Ozone Depletion list, Dual-use items list, Explosives Precursors list, or Drug Precursors list.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for EROL EAP 2368?
The signal word is no signal word.
What is the physical form of EROL EAP 2368?
EROL EAP 2368 is a liquid with light brown. color. It has characteristic. odor.
What is the solubility of EROL EAP 2368?
Not available
What is EROL EAP 2368 used for?
defoamer
What is the melting point of EROL EAP 2368?
The melting point is Not available and the boiling point is Not available.