Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- IPAC 9115
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant.
Uses advised against
No additional information available
Manufacturers & Suppliers
IPAC, Inc.
manufacturer
7600 Dublin Blvd. Suite 240, 94568 Dublin, CA - USA
925-556-5530
Emergency Contacts
Emergency Contact
(800) 720-7949
7:00 AM – 5:00 PM - PST
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Lubricating oils, petroleum, hydrotreated spent EC: 265-161-3 | 64742-58-1 | 30% | Yes |
| Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts EC: 272-028-3 | 68649-42-3 | 30% | Yes |
| Distillates (petroleum), hydrotreated heavy paraffinic EC: 265-157-1 | 64742-54-7 | 25% | Yes |
| Distillates (petroleum), solvent-refined heavy paraffinic EC: 265-090-8 | 64741-88-4 | 5% | Yes |
| Naphtha (petroleum), hydrotreated heavy; low boiling point thermally cracked naphtha EC: 265-150-3 | 64742-48-9 | 1% | Yes |
| Complex of heterocyclical alkylamines | --- | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled and if breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
Symptoms: None under normal use.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. Wash contaminated clothing before reuse. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms: No significant signs or symptoms indicative of any health hazard are expected to occur as a result of skin contact.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Symptoms: Causes serious eye irritation.
Rinse mouth. Do NOT induce vomiting. If symptoms persist, contact a doctor or physician.
Symptoms: No significant signs or symptoms indicative of any adverse health hazard are expected to occur as a result of ingestion.
Medical Treatment
All treatments should be based on observed signs and symptoms of distress in the patient.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Do not use a heavy water stream.
No specific fire or explosion hazard.
Use extinguishing media appropriate for surrounding fire. Exercise caution when fighting any chemical fire. Avoid (reject) fire-fighting water to enter environment.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection. Use self-contained breathing apparatus. EN 469.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Prevent entry to sewers and public waters.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.
Materials: inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. In case of leaking gas fire, eliminate all ignition sources if safe to do so.
Keep only in the original container in a cool well ventilated place. Keep container closed when not in use.
Wash hands thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse.
In case of leaking gas fire, eliminate all ignition sources if safe to do so.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Avoid creating mist or spray. Avoid splashing.
Wear suitable gloves. nitrile rubber gloves. EN 374.
Chemical goggles or safety glasses. EN 166.
Use an approved respirator equipped with oil/mist cartridges. Where exposure through inhalation may occur from use, respiratory protection equipment is recommended. EN 12083.
Wear suitable protective clothing. Impervious clothing. EN702.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No additional information available
Hazardous polymerization will not occur.
Extremely high or low temperatures. Keep away from sources of ignition.
strong acids. Strong bases.
Carbon monoxide. Carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
Not established.
12.2. Persistence and degradability
Not readily biodegradable.
12.3. Bioaccumulative potential
Not established.
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The substance/mixture does not meet the PBT or vPvB criteria of REACH, annex XIII.
12.6. Other adverse effects
Avoid release to the environment
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in a safe manner in accordance with local/national regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for IPAC 9115?
The signal word is warning.
What is the physical form of IPAC 9115?
IPAC 9115 is a liquid with colourless. color. It has characteristic. odor.
What is the solubility of IPAC 9115?
No data available
What is IPAC 9115 used for?
Lubricant.
What are the hazard statements for IPAC 9115?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation
What is the melting point of IPAC 9115?
The melting point is No data available and the boiling point is No data available.