NextSDS Logo
Safety Data Sheet EN

Infineum D3492L

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Infineum D3492L
Product Code
73989

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Additive for heavy duty diesel engine lubricating oil

Uses advised against

This material should not be used for any other purpose than that recommended without expert advice.

Manufacturers & Suppliers

Infineum Singapore LLP logo

Infineum Singapore LLP

manufacturer

1 Harbourfront Avenue #08-01/08, Keppel Bay Tower, Singapore 098632

http://www.infineum.com

Emergency Contacts

Emergency Contact

9838-8363

Emergency Contact

+65 9838-8363

Emergency Contact

6664-1939

Emergency Contact

+65-6664-1939

Emergency Contact

6664-1946

Emergency Contact

+65-6664-1946

Emergency Contact

6867-5531

Emergency Contact

+65-6867-5531

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2
Aquatic Acute Cat. 3
Aquatic Chronic Cat. 3

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P264 Wash skin thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P332 + P313 If skin irritation occurs: Get medical advice/ attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P501 Dispose of contents/ container to an approved waste disposal plant.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Zinc alkyl dithiophosphate --- 5 - 10% Yes
Alkyl phenol --- 5 - 10% Yes
Long chain alkyl thio carbamide metal complex --- 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Consult a physician after significant exposure. If unconscious, place in recovery position and seek medical advice. If breathing has stopped, assist ventilation with a mechanical device. Do not use mouth-to-mouth resuscitation if exposure to hydrogen sulphide is suspected.

Skin contact

Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician. In case of burns apply cold water until pain subsides then seek medical advice.

Symptoms: Dermatitis

Eye contact

Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists: Get medical advice/ attention.

Ingestion

Clean mouth with water and drink afterwards plenty of water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. Obtain medical attention.

Immediate Medical Attention

Obtain medical attention. If eye irritation persists: Get medical advice/ attention. If symptoms persist, call a physician.

Medical Treatment

Show this safety data sheet to the doctor in attendance. The first aid procedure should be established in consultation with the doctor responsible for industrial medicine. If a person vomits when lying on his back, place him in the recovery position. Keep patient warm and at rest.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames

Unsuitable media

High volume water jet

Specific hazards

Not classified as flammable or combustible, but will combust if ignited.

Instructions

Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. Fire-fighters should exercise extreme caution in enclosed spaces due to the possible presence of toxic decomposition and combustion products.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus. Exposure to decomposition products may be a hazard to health. Self-contained full-face overpressure breathing apparatus should be used in enclosed spaces. Use standard body protective equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ensure adequate ventilation. Use personal protective equipment. Avoid contact with spilled material. Do not touch or walk through spilled material.

Large spill

Dyke far ahead of liquid spill for later recovery and disposal.

Environmental

Prevent entry into waterways, sewers, basements or confined areas. Do not flush into surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so. Try to prevent the material from entering drains or water courses.

Cleanup methods

Recover by pumping or with suitable absorbent. Soak up with inert absorbent material. Clean contaminated floors and objects thoroughly while observing environmental regulations.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with skin and eyes. Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations. Do not reheat above the maximum loading temperature. Extreme caution must be used in tank gauging or similar operations as overheating could lead to accumulation of lethal concentrations of hydrogen sulphide in the head-space of containers.

Storage

Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.

Hygiene

Smoking, eating and drinking should be prohibited in the application area.

Fire prevention

Normal measures for preventive fire protection. Static accumulator: This material is not a static accumulator.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No special requirements under ordinary conditions of use and with adequate ventilation. If decomposition is suspected, or if the product has been overheated, do not open the container, discontinue heating and secure the unit. Initiate emergency procedures, taking all necessary precautions to avoid exposure to noxious or flammable gases (e.g. hydrogen sulphide), such as evacuation of contaminated areas, and use of suitable respiratory protection.

Hands

Polyvinyl alcohol or nitrile- butyl-rubber gloves Before removing gloves clean them with soap and water. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. When handling hot material, use heat resistant gloves.

Eyes

Eye wash bottle with pure water Tightly fitting safety goggles Ensure that eyewash stations and safety showers are close to the workstation location.

Respiratory

In the case of vapour formation use a respirator with an approved filter.

Skin/Body

Impervious clothing Choose body protection according to the amount and concentration of the dangerous substance at the work place. Long sleeved clothing

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
brown
Colour Intensity
---
Form
viscous liquid
Odor
hydrocarbon-like
Odor Threshold
not determined
Ph
Not applicable
Melting Point
not determined
Boiling Point
not determined
Flash Point
187 °C (369 °F) Method: Pensky-Martens Closed Cup (ASTM D93)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not applicable
Vapor Pressure
< 0,1 hPa (< 0,1 mmHg) at 20 °C (68 °F) estimated
Vapor Density
not determined
Relative Density
0,957 at 15,6 °C (60,1 °F)
Bulk Density
Not applicable
Density
0,957 g/cm3 at 15 °C (59 °F) Method: ASTM D4052
Flammability
not determined
Upper Explosive Limit
not determined
Lower Explosive Limit
not determined
Explosive Limits
---
Auto Ignition Temperature
Not applicable
Decomposition Temperature
not determined
Solubility
---
Partition Coefficient
not determined
Solubility In Water
< 0,0001 g/l estimated
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
152 mm2/s at 100 °C (212 °F) Method: ASTM D 445 2760 mm2/s at 40 °C (104 °F) Method: ASTM D 445
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

No dangerous reaction known under conditions of normal use.

Hazardous reactions

No hazards to be specially mentioned.

Avoid

Excessive heat.

Incompatible

Strong oxidizing agents, water

Decomposition

Hydrogen Sulfide

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Toxicity to fish : No data is available on the product itself. Toxicity to daphnia and other aquatic invertebrates : No data is available on the product itself. Toxicity to algae : No data is available on the product itself.

No data is available on the product itself.

12.1 Toxicity

Toxicity to fish : LC50 (Oncorhynchus mykiss (rainbow trout)): 4,5 mg/l Exposure time: 96 h Test Method: semi-static test Analytical monitoring: no Test substance: Read-across (Analogy) Method: OECD Test Guideline 203 GLP: yes Toxic to aquatic life. Toxicity to daphnia and other aquatic invertebrates : EL50 (Daphnia magna (Water flea)): 5,4 mg/l Exposure time: 48 h Test Method: static test Analytical monitoring: yes Test substance: Read-across (Analogy) Method: OECD Test Guideline 202 GLP: yes Toxic to aquatic life. Toxicity to algae : EbC50 (Selenastrum capricornutum (green algae)): 2,1 mg/l Exposure time: 96 h Test Method: static test Analytical monitoring: yes Test substance: Read-across (Analogy) Method: OECD Test Guideline 201 GLP: yes Toxic to aquatic life.

12.1 Toxicity

Toxicity to fish : LC50 (Danio rerio (zebra fish)): > 74 mg/l Exposure time: 96 h Test Method: semi-static test Test substance: yes Method: OECD Test Guideline 203 Based on available data, the classification criteria are not met. Toxicity to daphnia and other aquatic invertebrates : EC50 (Daphnia magna (Water flea)): > 100 mg/l Exposure time: 24 h Test substance: yes Method: OECD Test Guideline 202 Based on available data, the classification criteria are not met. Toxicity to algae : EC50 (Desmodesmus subspicatus (green algae)): > 3 mg/l Exposure time: 72 h Test substance: yes Method: OECD Test Guideline 201 Based on available data, the classification criteria are not met.

Toxicity

Toxicity to fish : LL50 (Oncorhynchus mykiss (rainbow trout)): > 94,8 mg/l Exposure time: 96 h Test Method: semi-static test Test substance: Read-across (Analogy) Method: OECD Test Guideline 203 LL50 (Oncorhynchus mykiss (rainbow trout)): > 670 mg/l Exposure time: 96 h Test Method: semi-static test Test substance: Read-across (Analogy) Method: OECD Test Guideline 203 Based on available data, the classification criteria are not met. Toxicity to daphnia and other aquatic invertebrates : EL50 (Daphnia magna (Water flea)): 50 mg/l Exposure time: 48 h Test Method: static test Test substance: yes Method: OECD Test Guideline 202 Harmful to aquatic life. Toxicity to algae : EL50 (Pseudokirchneriella subcapitata (microalgae)): 14 mg/l Exposure time: 72 h Analytical monitoring: yes Test substance: Read-across (Analogy) Method: OECD Test Guideline 201 Harmful to aquatic life. NOELR : 4,05 mg/l Toxicity to bacteria : EC50 : 100 mg/l Exposure time: 3 h Test substance: Read-across (Analogy) Method: OECD Test Guideline 209 Based on available data, the classification criteria are not met. NOEC : > 100 mg/l Toxicity to daphnia and other aquatic invertebrates (Chronic toxicity) : NOELR: 100 mg/l Exposure time: 21 d Species: Daphnia magna (Water flea) Analytical monitoring: yes Test substance: yes Method: OECD Test Guideline 211 Based on available data, the classification criteria are not met.

12.2 Persistence and degradability

aerobic activated sludge Concentration: 10 mg/l Result: Not readily biodegradable. Biodegradation: 1,5 % Exposure time: 28 d Method: OECD Test Guideline 301B Test substance: yes GLP: yes According to the results of tests of biodegradability this product is not readily biodegradable.

Persistence and degradability

Result: Not biodegradable Method: OECD Test Guideline 301B Test substance: yes According to the results of tests of biodegradability this product is not readily biodegradable.

12.2 Persistence and degradability

Biodegradability : activated sludge Concentration: 29,04 mg/l Result: Not readily biodegradable. Biodegradation: 23 % Exposure time: 29 d Method: OECD Test Guideline 301B Test substance: Read-across (Analogy)

Bioaccumulative potential

Product: Bioaccumulation : No data is available on the product itself. Partition coefficient: n-octanol/water : not determined Components: Zinc alkyl dithiophosphate:

No data is available on the product itself. Partition coefficient: n-octanol/water is not determined.

12.3 Bioaccumulative potential

Due to the distribution coefficient n-octanol/water, accumulation in organisms is not expected. Partition coefficient: n-octanol/water : log Pow: 0,9 at 23 °C

Bioaccumulative potential

Bioaccumulation : Species: Oncorhynchus mykiss (rainbow trout) Exposure time: 35 d Bioconcentration factor (BCF): 260 Test substance: yes Method: OECD Test Guideline 305 Due to the distribution coefficient n-octanol/water, accumulation in organisms is possible. Partition coefficient: n-octanol/water : log Pow: 9,2

12.3 Bioaccumulative potential

Species: Cyprinus carpio (Carp) Exposure time: 8 Weeks Concentration: 0,05 mg/l Bioconcentration factor (BCF): 88 Test substance: Read-across (Analogy) Method: OECD Test Guideline 305. Species: Cyprinus carpio (Carp) Exposure time: 8 Weeks Concentration: 0,5 mg/l Bioconcentration factor (BCF): < 7,4 Test substance: Read-across (Analogy) Method: OECD Test Guideline 305 Based on available data, the classification criteria are not met.

Based on available data, the classification criteria are not met.

Mobility in soil

Product: Mobility : No data is available on the product itself. Components: Zinc alkyl dithiophosphate: | Mobility | : After release, adsorbs onto soil. | | --- | --- | Alkyl phenol: | Mobility | : After release, adsorbs onto soil. | | --- | --- | Long chain alkyl thio carbamide metal complex: | Mobility | : After release, adsorbs onto soil. | | --- | --- |

Results of PBT and vPvB assessment

Product: Assessment : No data is available on the product itself. Components: Zinc alkyl dithiophosphate: Assessment : This substance is not considered to be persistent, bioaccumulating and toxic (PBT)., This substance is not considered to be very persistent and very bioaccumulating (vPvB). Alkyl phenol: Assessment : This substance is not considered to be persistent, bioaccumulating and toxic (PBT)., This substance is not considered to be very persistent and very bioaccumulating (vPvB). Long chain alkyl thio carbamide metal complex: Assessment : This substance is not considered to be persistent, bioaccumulating and toxic (PBT)., This substance is not considered to be very persistent and very bioaccumulating (vPvB).

No data is available for the product itself. The components Zinc alkyl dithiophosphate, Alkyl phenol, and Long chain alkyl thio carbamide metal complex are not considered to be PBT or vPvB.

Other adverse effects

Additional ecological information : None known.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of contents/ container to an approved waste disposal plant.

Disposal

The product should not be allowed to enter drains, water courses or the soil. Do not contaminate ponds, waterways or ditches with chemical or used container.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

National chemical inventory status and registration requirements for K-REACH and REACH.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Infineum D3492L?

The signal word is warning.

What is the physical form of Infineum D3492L?

Infineum D3492L is a liquid with brown color. It has hydrocarbon-like odor.

What is Infineum D3492L used for?

Additive for heavy duty diesel engine lubricating oil

What are the hazard statements for Infineum D3492L?

This substance has 2 hazard statements:

  • H315: Causes skin irritation.
  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of Infineum D3492L?

The melting point is not determined and the boiling point is not determined.