Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- NYCOLUBE 210 G
- Product Form
- Mixture
- Product Code
- NL210-9
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial use Lubricant
Manufacturers & Suppliers
NYCO
manufacturer
66 Avenue des Champs Elysées - BP414 75366 Paris Cedex 08 France
+33 (0)1 45 61 50 00
http://www.nyco-group.com
Emergency Contacts
Emergency Contact
+33 (0)1 45 42 59 59
INRS/ORFILA
33 1 45 42 59 59
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phenol, butenylated, aminated polymer | --- | 10% | Yes |
| Distillates (petroleum), solvent-dewaxed heavy paraffinic (Note L) EC: 265-169-7 | 64742-65-0 | 5% | Yes |
| Distillates (petroleum) hydrotreated heavy paraffinic (<20.5mm2/s @40°C) (Note L) EC: 265-157-1 | 64742-54-7 | 5% | Yes |
| Reaction products of fatty acids, C14-C18 (branched and linear) and C18 (unsaturated) with tetraethylenepentamine (linear, branched, cyclic) EC: 701-204-9 | --- | 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Seek medical advice (show the label where possible).
Symptoms: At high concentrations, the vapours can be irritating to the respiratory system.
IF ON SKIN: Wash with plenty of soap and water. Seek medical advice (show the label where possible).
Symptoms: Repeated exposure may cause skin dryness or cracking. irritation (itching, redness, blistering).
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice (show the label where possible).
Symptoms: Eye irritation.
IF SWALLOWED: rinse mouth. Do NOT induce vomiting. Seek medical advice (show the label where possible).
Symptoms: Possible irritation of mucous membranes and digestive tract, nausea, vomiting.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Foam. Dry powder. Carbon dioxide.
Strong water jet.
On burning: release of harmful/irritant gases/vapours.
Firefighter Protection
Protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For a large spillage, contain the spillage by bunding.
For a large spillage, contain the spillage by bunding.
Contain any spills with dikes or absorbents to prevent migration and entry into sewers or streams.
Soak up with inert absorbent material (for example sand, sawdust, a universal binder, silica gel).
Materials: sand, sawdust, a universal binder, silica gel
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear suitable protective clothing. Personal protective equipment. When using do not eat, drink or smoke. Always wash your hands immediately after handling this product, and once again before leaving the workplace. Avoid spilling the product, as this might cause falls.
Store in original container. Store in dry, cool, well-ventilated area.
When using do not eat or drink. Always wash your hands immediately after handling this product, and once again before leaving the workplace. Wash contaminated clothing before reuse.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant gloves (according to European standard NF ISO 374-1 or equivalent)
Safety glasses with side shields
No personal breathing protective equipment is normally required
Wear suitable protective clothing
Do not flush into surface water or sewer system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No additional information available
Stable at ambient temperature and under normal conditions of use.
No additional information available
High temperature.
Strong oxidizing agents.
No hazardous decomposition products known at room temperature.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
The substance is not classified as hazardous to the aquatic environment, neither short-term (acute) nor long-term (chronic).
12.2. Persistence and degradability
No data available
12.3. Bioaccumulative potential
No data available
12.4. Mobility in soil
No data available
12.5. Results of PBT and vPvB assessment
No data available
12.6. Endocrine disrupting properties
No data available
12.7. Other adverse effects
No data available
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
Not established.
12.2. Persistence and degradability
The substance is not readily biodegradable.
12.2. Persistence and degradability
The substance is not readily biodegradable.
12.2. Persistence and degradability
12.2. Persistence and degradability
Not readily biodegradable.
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Collect all waste in suitable and labelled containers and dispose according to local legislation.
Collect all waste in suitable and labelled containers and dispose according to local legislation.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for NYCOLUBE 210 G?
The signal word is no signal word.
What is the physical form of NYCOLUBE 210 G?
NYCOLUBE 210 G is a liquid with green. color. It has not available odor.
What is the solubility of NYCOLUBE 210 G?
Not available
What is NYCOLUBE 210 G used for?
Industrial use Lubricant
What is the melting point of NYCOLUBE 210 G?
The melting point is -39 °C .