Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PRODUCT 116.11
- Chemical Name
- Polyolefin amide alkeneamine
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
None identified.
Uses advised against
None identified.
Manufacturers & Suppliers
THE LUBRIZOL CORPORATION
manufacturer
29400 LAKELAND BOULEVARD, WICKLIFFE, OH 44092-2298, US
(440)943-1200
Emergency Contacts
CHEMTREC
(+1)703 527 3887
24-HOUR
CHEMTREC
1 800 424 9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mineral oil 30 – 40%
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Mineral oil | --- | 30 - 40% | No |
SDS_US - PRODUCT 116.11 <!-- PAGE 2 --> Lubrizol Version: 5.0 Revision Date: 12/02/2022
Notes
The mineral oil contained in this material may be described by one or more of the following CAS Nos.: 64742-54-7, 64742-65-0, 64742-55-8, and 64742-56-9.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove exposed person to fresh air if adverse effects are observed.
Wash with soap and water. Get medical attention if symptoms occur. Launder contaminated clothing before reuse.
Any material that contacts the eye should be washed out immediately with water. If easy to do, remove contact lenses.
Treat symptomatically. Get medical attention.
Immediate Medical Attention
Get medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, Dry chemical or Foam. Water can be used to cool and protect exposed material.
Not determined.
See section 10 for additional information.
No data available.
Firefighter Protection
Wear full protective firegear including self-containing breathing apparatus operated in the positive pressure mode with full facepiece, coat, pants, gloves and boots.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Personal Protective Equipment must be worn, see Personal Protection Section for PPE recommendations.
Dike far ahead of larger spill for later recovery and disposal.
Avoid release to the environment. Do not contaminate water sources or sewer. Environmental manager must be informed of all major spillages. Prevent further leakage or spillage if safe to do so.
Pick up free liquid for recycle and/or disposal. Residual liquid can be absorbed on inert material.
Materials: inert material
Related Products
Similar products with comparable safety profiles
PRODUCT 116.74D
UFI: RA3E-X38V-M00C-NRCG
605100 R11634A
UFI: 0845-701W-000W-4SAC
LUBRIZOL® 2063 / 116612
CAS: Not applicable.
HiTEC® 11600 Performance Additive
UFI: 1A7Y-EMK7-D87C-4SK6
976-H0160 LUXAFLOOR PTX PART B
---
R01126A
UFI: NRVE-WGFX-C2CE-0V36
R01126A
UFI: NRVE-WGFX-C2CE-0V36
TEROSON AL 7163 LIQUID APPLIED
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe good industrial hygiene practices. Provide adequate ventilation. Wear appropriate personal protective equipment. Material can accumulate static charges which may cause an electrical spark (ignition source). Use proper bonding and/or grounding procedures. Use grounding and bonding connection when transferring material. In case of spills, beware of slippery floors and surfaces.
Store away from incompatible materials. See section 10 for incompatible materials.
Observe good industrial hygiene practices.
Material can accumulate static charges which may cause an electrical spark (ignition source). Use proper bonding and/or grounding procedures.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
No data available.
Will not occur.
Do not expose to excessive heat, ignition sources, or oxidizing materials.
Strong acids. Strong oxidizing agents.
Thermal decomposition or combustion may generate smoke, carbon monoxide, carbon dioxide, nitrogen oxides, and other products of incomplete combustion.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
Persistence and Degradability Biodegradation
Persistence and Degradability Biodegradation
12.3 Bioaccumulative potential
Mobility
Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Treatment, storage, transportation, and disposal must be in accordance with applicable Federal, State/Provincial, and Local regulations.
Since emptied containers retain product residue, follow label warnings even after container is emptied.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The information that was used to confirm the compliance status of this product may deviate from the chemical information shown in Section 3.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PRODUCT 116.11?
The signal word is no signal word.
What is the physical form of PRODUCT 116.11?
PRODUCT 116.11 is a liquid with dark color. It has mild odor.
What is PRODUCT 116.11 used for?
None identified.