Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- EUROPA 10W40
- Product Form
- Mixture
- Product Code
- 120057
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial use, Professional use, Consumer use. Wide dispersive use. Lubricant. Lubricants and additives.
Uses advised against
No additional information available
Manufacturers & Suppliers
UNIL LUBRICANTS NV
national supplier
Bergensesteenweg 713, 1600 Sint - Pieters - Leeuw - Belgique-Belgie
0032 02 365 02 00
http://www.unil.be
Emergency Contacts
National Poisons Information Service (Cardiff Centre) Gwenwyn Ward, Llandough Hospital
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The highly refined mineral oil contains <3% (w/w) DMSO extract, according to IP346.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated heavy paraffinic; Baseoil unspecified; [A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil of at least 100 SUS at 100F (19cSt at 40C). It contains a relatively large proportion of saturated hydrocarbons.] EC: 265-157-1 | 64742-54-7 | 25 - 50% | No |
| Mineral oil* | --- | 5% | Yes |
| Distillates (petroleum), hydrotreated light paraffinic Base oil EC: 265-158-7 | 64742-55-8 | 1 - 5% | Yes |
| Phosphorodithioic acid, mixed O,O-bis(1,3dimethylbutyl and iso-Pr) esters, zinc salts EC: 283-392-8 | 84605-29-8 | 0.1 - 2.5% | Yes |
Notes
DMSO extract < 3% (IP 346)
First Aid Measures
Emergency procedures for chemical exposure incidents
When symptoms occur: go into open air and ventilate suspected area. Allow affected person to breathe fresh air. Allow the victim to rest.
Symptoms: None under normal use.
Rinse skin with water/shower. Wash contaminated clothing before reuse. Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.
Symptoms: Contact during a long period may cause light irritation.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention if pain, blinking or redness persists. Rinse immediately with plenty of water.
Symptoms: May cause slight irritation.
Rinse mouth. Call a POISON CENTER/doctor if you feel unwell. Do NOT induce vomiting. Obtain emergency medical attention.
Symptoms: Not expected to present a significant hazard under anticipated conditions of normal use.
Immediate Medical Attention
No additional information available
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. Materials: Nitrile rubber (NBR), Neoprene rubber (HNBR), Polyvinylchloride (PVC). Permeation: 6 (> 480 minutes).
Eye protection should only be necessary where liquid could be splashed or sprayed. Chemical goggles or safety glasses. Type: Safety glasses for droplet protection.
Avoid the formation of mists in the atmosphere. If this material is handled at elevated temperature or under mist forming conditions, approved respiratory protection equipment should be used. Wear appropriate mask. Device: Aerosol mask, Filter type: Type P3, Condition: Protection for Liquid particles.
Separate working clothes from town clothes. Launder separately. Rinse and then wash skin thoroughly with water and soap.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for EUROPA 10W40?
The signal word is no signal word.
What is the physical form of EUROPA 10W40?
EUROPA 10W40 is a liquid appearing as oily. with colourless to yellow. color. It has characteristic. odor.
What is the solubility of EUROPA 10W40?
Material insoluble in water. soluble in most organic solvents.
What is EUROPA 10W40 used for?
Industrial use, Professional use, Consumer use. Wide dispersive use. Lubricant. Lubricants and additives.
What is the melting point of EUROPA 10W40?
The melting point is No data available and the boiling point is No data available.