1006.8306

Provide fresh air. In case of respiratory tract irritation, consult a physician.

Symptoms: Dizziness

After contact with skin, wash immediately with plenty of water and soap. Remove/Take off immediately all contaminated clothing. In case of skin irritation, consult a physician.

After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an ophthalmologist immediately. Remove contact lenses, if present and easy to do. Continue rinsing.

Symptoms: Serious eye damage/eye irritation

If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Let water be drunken in little sips (dilution effect). Get medical advice/attention if you feel unwell.

Dry extinguishing powder, alcohol resistant foam, Carbon dioxide (CO2), Extinguishing powder

Water spray jet, Full water jet

Highly flammable liquid and vapour (H225). Combustible

Use caution when applying carbon dioxide in confined spaces. Carbon dioxide can displace oxygen.

Remove persons to safety. Remove all sources of ignition. Provide adequate ventilation.

Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil.

Treat the recovered material as prescribed in the section on waste disposal.

Do not eat, drink or smoke when using this product. Wear personal protection equipment (refer to section 8). Avoid contact with skin, eyes and clothes.

Store in a place accessible by authorized persons only. Keep only in the original container in a cool, well-ventilated place.

Remove contaminated, saturated clothing immediately. Provide eye shower and label its location conspicuously. Thorough skin-cleansing after handling the product.

Vapours are heavier than air, spread along floors and form explosive mixtures with air. Take precautionary measures against static discharges. Keep away from sources of heat (e.g. hot surfaces), sparks and open flames. Keep away from sources of ignition - No smoking.

Provide adequate ventilation as well as local exhaustion at critical locations.

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. Recommended glove articles KCL - Butyl 898. Thickness of the glove material >0,5mm. Breakthrough time: >480min. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Check leak tightness/impermeability prior to use. Tested protective gloves must be worn EN ISO 374. In the case of wanting to use the gloves again, clean them before taking off and air them well. Breakthrough times and swelling properties of the material must be taken into consideration.

Eye glasses with side protection EN 166

Respiratory protection necessary at: exceeding exposure limit values. Self-contained respirator (breathing apparatus). Filtering device with filter or ventilator filtering device of type: AX

Chemical resistant safety shoes. Before starting work, apply solvent-resistant skincare preparations.

Avoid release to the environment. Refer to special instructions/Safety data sheets.

The mixture is chemically stable under recommended conditions of storage, use and temperature.

No data available

No hazardous reaction when handled and stored according to provisions.

In case of exceeding the storage temperature: Ignition hazard Danger of bursting container.

Acid, Oxidising agent, Alkali (lye)

Carbon monoxide, Carbon dioxide, Gases/vapours, toxic

Waste disposal according to directive 2008/98/EC, covering waste and dangerous waste.

Send to a hazardous waste incinerator facility under observation of official regulations.