PV106

Move to fresh air. For breathing difficulties, oxygen may be necessary. If breathing stops, provide artificial respiration. Call a POISON CENTER or doctor/physician if you feel unwell. Do not use mouth-to-mouth method if victim inhaled the substance. Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.

Wash off with soap and plenty of water. Get medical attention if irritation develops and persists.

Flush eyes immediately with large amounts of water. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention immediately.

Rinse mouth thoroughly. Do not induce vomiting without advice from poison control center. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Do not use mouth-to-mouth method if victim ingested the substance. Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. If ingestion of a large amount does occur, call a poison control center immediately.

Water spray, foam, dry powder or carbon dioxide.

Do not use water jet as an extinguisher, as this will spread the fire.

Fire may produce irritating, corrosive and/or toxic gases.

Use water spray to cool unopened containers.

Keep unnecessary personnel away. Avoid inhalation of dust from the spilled material. Wear appropriate protective equipment and clothing during clean-up. Ensure adequate ventilation.

Avoid release to the environment.

Shovel into dry containers. Cover and move the containers. Flush the area with water.

Keep formation of airborne dusts to a minimum. Do not breathe dust. Avoid contact with eyes. Avoid prolonged exposure. Wear personal protective equipment.

Store in tightly closed original container in a dry, cool and well-ventilated place. Keep away from food, drink and animal feedingstuffs. Use care in handling/storage. Store in accordance with local/regional/national/international regulation.

Avoid contact with eyes. Avoid prolonged exposure.

Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.

Wear protective gloves.

Wear safety glasses with side shields.

When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.

Material is stable under normal conditions

No dangerous reaction know under conditions of normal use.

Avoid temperatures exceeding the flash point.

At thermal decomposition temperatures, carbon dioxide. Sulfur oxides.

Dispose of in accordance with local regulations.

Collect and reclaim or dispose in sealed containers at licensed waste disposal site.