Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Infineum F7995
- Synonyms
- 72761
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive for petroleum fuels
Uses advised against
This material should not be used for any other purpose than that recommended without expert advice.
Manufacturers & Suppliers
INFINEUM UK LIMITED
manufacturer
P. O. Box 1, Milton Hill, Abingdon, Oxfordshire OX13 6BB, United Kingdom
+44 1235 54 9501
http://www.infineum.com
Emergency Contacts
Emergency Contact
04-4274.4690
Emergency Contact
+33-4.4274.4690
Emergency Contact
0221-7499 3355
Emergency Contact
+49-221-7499 3355
Emergency Contact
019-2150 221
Emergency Contact
+39 019-2150 221
Emergency Contact
01235 549777
Emergency Contact
+44 1235 549777
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C11-C13, isoalkanes, <2% aromatics | --- | 70 - 90% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If unconscious place in recovery position and seek medical advice. Keep respiratory tract clear. If symptoms persist, call a physician.
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician.
Symptoms: Dermatitis
Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists: Get medical advice/ attention.
Clean mouth with water and drink afterwards plenty of water. Do NOT induce vomiting. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. Take victim immediately to hospital.
Immediate Medical Attention
Take victim immediately to hospital.
Medical Treatment
Show this safety data sheet to the doctor in attendance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames
High volume water jet
Combustible.
For safety reasons in case of fire, cans should be stored separately in closed containments. In the event of fire and/or explosion do not breathe fumes. Use a water spray to cool fully closed containers.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Exposure to decomposition products may be a hazard to health.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with spilled material. Do not touch or walk through spilled material.
Dyke far ahead of liquid spill for later recovery and disposal. Recover by pumping or with suitable absorbent
Prevent entry into waterways, sewers, basements or confined areas. Prevent further leakage or spillage if safe to do so. Retain and dispose of contaminated wash water.
Recover by pumping or with suitable absorbent. Collect with non-combustible absorbent material. Clean contaminated floors and objects thoroughly.
Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid formation of aerosol. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Handle and open container with care. Do not spray on a naked flame or any incandescent material. Keep away from open flames, hot surfaces and sources of ignition.
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Observe label precautions. No decomposition if stored and applied as directed.
Smoking, eating and drinking should be prohibited in the application area.
Do not spray on a naked flame or any incandescent material. Keep away from open flames, hot surfaces and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special requirements under ordinary conditions of use and with adequate ventilation.
Solvent-resistant gloves Before removing gloves clean them with soap and water. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Eye wash bottle with pure water Tightly fitting safety goggles Ensure that eyewash stations and safety showers are close to the workstation location. The applicable European standard can be found in EN 166.
In the case of vapour formation use a respirator with an approved filter. The applicable European standard can be found in EN 140, EN 137, EN 143, EN 14387.
Impervious clothing Choose body protection according to the amount and concentration of the dangerous substance at the work place. The applicable European standard can be found in EN 14605.
Prevent entry into waterways, sewers, basements or confined areas. Local authorities should be advised if significant spillages cannot be contained. Do not flush into surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so. Retain and dispose of contaminated wash water. Try to prevent the material from entering drains or water courses. If the product contaminates rivers and lakes or drains inform respective authorities.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No dangerous reaction known under conditions of normal use.
Vapours may form explosive mixture with air.
Avoid heat, sparks, open flames and other ignition sources.
Strong oxidizing agents
No decomposition if used as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
No data is available on the product itself regarding biodegradability.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
No data is available on the product itself regarding bioaccumulation; partition coefficient is not determined.
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The product contains no components considered to be PBT or vPvB at levels of 0.1% or higher. The component Hydrocarbons, C11-C13, isoalkanes, <2% aromatics is not considered to be PBT or vPvB.
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not dispose of waste into sewer. Do not contaminate ponds, waterways or ditches with chemical or used container. Dispose of contents/ container to an approved waste disposal plant.
Dispose of contents/ container to an approved waste disposal plant.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Risk classification according to VbF: Flash Point > 55 °C up to 100 °C, at 15 °C not miscible with water.
Take note of Dir 92/85/EEC on the safety and health at work of pregnant workers. Take note of Dir 94/33/EC on the protection of young people at work.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Infineum F7995 known by?
Infineum F7995 is also known as: 72761
What is the hazard signal word for Infineum F7995?
The signal word is danger.
What is the physical form of Infineum F7995?
Infineum F7995 is a liquid with dark brown color. It has solvent-like odor.
What is Infineum F7995 used for?
Additive for petroleum fuels
What are the hazard statements for Infineum F7995?
This substance has 1 hazard statement:
- H304: May be fatal if swallowed and enters airways.
What is the melting point of Infineum F7995?
The melting point is not determined and the boiling point is not determined.