Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Label-Remover pen
- Product Code
- 213.015
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- W300-P0FQ-V00W-GPU9
Identified Uses
For professional use only
Manufacturers & Suppliers
ECS Cleaning Solutions GmbH
manufacturer
Wolfener Str. 32-34, D-12681 Berlin Germany
+49 (0)30 / 36 46 40 36
ECS AG
distributor
Roosstrasse 53, CH-8832 Wollerau
+41 (0)44 / 787 53 56
Emergency Contacts
Intoxications Information Center
+49 761 19240
Swiss Toxicological Information Centre
+41 44 251 51 51
Tox Info Suisse Emergency Number
145
24hr
Intoxication information center
+43 1 406 43 43
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
No special measures are necessary. Provide fresh air.
After contact with skin, wash immediately with plenty of water and soap. In case of skin irritation, consult a physician. In case of skin reactions, consult a physician.
Symptoms: Causes skin irritation.
Rinse immediately carefully and thoroughly with eye-bath or water. In case of eye irritation consult an ophthalmologist.
Rinse mouth thoroughly with water. Do NOT induce vomiting.
Immediate Medical Attention
In case an intoxication is suspected, National Poisons Information Centre should be addressed immediately, number of Emergency telephone see in section 1.4.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
ABC-powder, Carbon dioxide (CO2), Foam, Extinguishing powder
Full water jet
Flammable liquid and vapour. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Move undamaged containers from immediate hazard area if it can be done safely.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel: Use personal protection equipment. Provide adequate ventilation. Remove all sources of ignition. For emergency responders: No information available.
Do not allow uncontrolled discharge of product into the environment.
Absorb with liquid-binding material (sand, diatomaceous earth, acid- or universal binding agents). Wash with plenty of water.
Materials: liquid-binding material (sand, diatomaceous earth, acid- or universal binding agents)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid: Skin contact. It is recommended to design all work processes always so that the following is excluded: Skin contact, Generation/formation of dust, generation/formation of aerosols. Vapours can form explosive mixtures with air. When using do not smoke.
Keep container tightly closed and in a well-ventilated place. Protect against: Heat.
No information available.
When using do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No information available.
Tested protective gloves must be worn. Protective gloves according to EN374. Glove material: Nitrile rubber (0.11 mm). Breakthrough time: > 480 min.
This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under recommended conditions of storage, use and temperature.
This material is considered to be non-reactive under normal use conditions.
No hazardous reaction when handled and stored according to provisions.
In case of warming: Ignition hazard. Keep away from sources of heat (e.g. hot surfaces), sparks and open flames. Keep cool. Protect from sunlight.
No information available.
No information available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 - Toxicity
Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 - Persistence and degradability
12.3 - Bioaccumulative potential
No indication of bioaccumulation potential.
12.4 - Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance does not meet the PBT/vPvB criteria of REACH, Annex XIII.
12.6 - Endocrine disrupting properties
The product does not contain any substances with endocrine disrupting properties.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste disposal according to directive 2008/98/EC, covering waste and dangerous waste. Dispose of waste according to applicable legislation.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2319
- Shipping Name
- TERPENE HYDROCARBONS, N.O.S.
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
For professional use only
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Label-Remover pen?
The signal word is danger.
What is the physical form of Label-Remover pen?
Label-Remover pen is a liquid appearing as liquid with light yellow color. It has characteristic odor.
What is Label-Remover pen used for?
For professional use only
What are the hazard statements for Label-Remover pen?
This substance has 5 hazard statements:
- H226: Flammable liquid and vapour
- H304: May be fatal if swallowed and enters airways
- H315: Causes skin irritation
- H317: May cause an allergic skin reaction
- H410: Very toxic to aquatic life with long lasting effects
What is the melting point of Label-Remover pen?
The melting point is No data available and the boiling point is 177 °C.