Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Palm Fatty Acids Residue
- Synonyms
- Palm Residue, PK Residue, Pitch
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Raw material for manufacturing oleochemical derivatives for industrial use.
Manufacturers & Suppliers
IOI ACIDCHEM SDN BHD
manufacturer
2411, Lorong Perusahaan Satu, Prai Industrial Complex, 13600 Prai, Penang, Malaysia.
+60-4-376 8888
http://www.ioioleo.com
Emergency Contacts
IOI ACIDCHEM SDN BHD
+604 3768888
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Palm Fatty Acids Residue.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Palm Fatty Acids Residue EC: 270-438-7 | 68440-15-3 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If suffocation is serious, take to a doctor
Symptoms: Sore throat, cough
Remove contaminated clothing, flush skin with water or shower, take to a doctor if necessary.
Flush with water; take to a doctor if necessary
Symptoms: Redness, pain
Rinse mouth, drink plenty of water, see physician
Symptoms: Sore throat, abdominal pain
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use dry powder, foam, carbon dioxide
Water jet
Combustible, keep away from open flame, no smoking.
Firefighter Protection
Use self-contained breathing equipment if in confined place
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to flow into drainage system.
Wash site with sodium bicarbonate solution or soda ash. Wipe clean. Rinse the area with hot water and detergent.
Materials: sodium bicarbonate solution, soda ash, hot water, detergent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use gloves and wear goggles when handling. Avoid contact with eyes and skin.
Keep in a cool and dry place, avoid extreme heat and cold. Store in clean, dry, preferably stainless steel vessels. In bulk, store at about 10 deg C above melting point or ambient. Temperature higher than necessary degrades quality at rate dependent on time and temperature of exposure. Exposure to ultraviolet light and sunlight must be minimised to prevent quality loss.
Avoid direct fire.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special measures required.
suitable protective gloves.
protective goggles.
suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
None known
Vapour mixes readily with air. Reacts with strong oxidants
None known
Avoid direct fire, strong oxidants/alkalis.
Strong Oxidants.
None known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Aquatic Toxicity
Persistence and degradability
Readily biodegradable
Bioaccumulative potential
Mobility in soil
Results of PBT and vPvB assessment
Endocrine disrupting properties
Other adverse effect
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste incineration with the approval of the responsible local authority.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Classification and labelling according to GHS: None; Classification and labelling according to EC: None
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Palm Fatty Acids Residue known by?
Palm Fatty Acids Residue is also known as: Palm Residue, PK Residue, Pitch
What is the hazard signal word for Palm Fatty Acids Residue?
The signal word is no signal word.
What is the physical form of Palm Fatty Acids Residue?
Palm Fatty Acids Residue is a liquid appearing as yellowish to dark liquid @60 °c . It has faint fatty odour odor.
What is Palm Fatty Acids Residue used for?
Raw material for manufacturing oleochemical derivatives for industrial use.
What is the melting point of Palm Fatty Acids Residue?
The melting point is <60°C .