EBECRYL® 1200 radiation curing resins

Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.

Remove contaminated clothing and shoes without delay. Wash immediately with plenty of water. Do not reuse contaminated clothing without laundering. Get medical attention if pain or irritation persists after washing or if signs and symptoms of overexposure appear.

Symptoms: pain or irritation

Rinse immediately with plenty of water for at least 15 minutes. Obtain medical advice if there are persistent symptoms.

If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give anything by mouth to an unconscious person.

Use water spray, alcohol foam, carbon dioxide or dry chemical to extinguish fires. Water stream may be ineffective.

high pressure water jet.

Keep containers cool by spraying with water if exposed to fire.

Avoid release to the environment.

Sweep up and place in a waste disposal container. Flush spill area with water.

Materials: Inert absorbent material

Keep away from heat, sparks and open flame. - No smoking. Keep container tightly closed. Ground/Bond container and receiving equipment. Use explosion-proof electrical, ventilating, lighting and other equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Wear protective gloves and eye/face protection. Wash hands thoroughly after handling. Avoid release to the environment. Use only outdoors or in a well-ventilated area. Avoid breathing vapors or spray mist.

Protect from direct sunlight and all heat sources in order to avoid sintering. Keep away from sources of ignition - refrain from smoking.

Wash hands thoroughly after handling.

Keep away from heat, sparks and open flame. - No smoking. Use only non-sparking tools. Take precautionary measures against static discharge. Observe the general rules of industrial fire protection.

Where this material is not used in a closed system, good enclosure and local exhaust ventilation should be provided to control exposure.

Wear eye/face protection such as chemical splash proof goggles or face shield.

For operations where inhalation exposure can occur use an approved respirator. Recommendations are listed below. Other protective respiratory equipment may be used based on user's own risk assessment. Recommended respirators include those certified by NIOSH. Recommended: Full Face Mask with organic vapor cartridge, Type A filter (BP >65°C)

Stable.

No information available

May occur. Hazardous polymerization can occur when exposed to direct sunlight. Hazardous exothermic polymerization can occur when heated. Uncontrolled polymerization may cause rapid evolution of heat and increase in pressure that could result in violent rupture of sealed storage vessels or containers

Avoid exposure to strong UV sources. Avoid friction with temperature increase as result. Avoid direct contact with heat sources. Avoid temperatures higher than 60°C. Protect from direct sunlight. Take precautionary measures against static discharges.

Avoid free radical producing initiators. Avoid contact with peroxides. Avoid contact with reactive metals. Contact with alkalis. They give an exothermic reaction with the product. Unintentional contact with them should be avoided.

oxides of carbon smoke soot

thermal treatment or incineration at EPA approved facilities

The Company encourages the recycle, recovery and reuse of materials, where permitted, as an alternate to disposal as a waste.

Protect against external heat sources higher than +40°C/104°F.

Protect against external heat sources higher than +40°C/104°F.