Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 210 Classic
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
adhesives
Uses advised against
No additional information available
Manufacturers & Suppliers
Rectavit N.V. N.V.
manufacturer
Ambachtenlaan 4, 9080 Lochristi, Belgium
+32 9 216 85 20
http://www.Rectavit.be
Emergency Contacts
Centre Anti-Poisons/Antigifcentrum c/o Hôpital Militaire Reine Astrid
+32 70 245 245
24/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| propylene carbonate EC: 203-572-1 | 108-32-7 | 5% | Yes |
| reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) | 55965-84-9 | 0.0015% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Respiratory problems: consult a doctor/medical service.
Wash skin with plenty of water. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms: skin irritation or rash
Rinse eyes with water as a precaution. Remove contact lenses, if present and easy to do. Continue rinsing. Consult an ophthalmologist if irritation persists.
Symptoms: irritation
Rinse mouth out with water. Get medical advice/attention if you feel unwell.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam. Carbon dioxide.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area.
Avoid release to the environment.
Take up liquid spill into absorbent material. Scoop absorbed substance into closing containers. Clean contaminated surfaces with an excess of water. Wash clothing and equipment after handling.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Wear personal protective equipment.
Store in a well-ventilated place. Protect against frost. Keep out of direct sunlight.
Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Protective gloves
Safety glasses
In case of insufficient ventilation, wear suitable respiratory equipment
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
No dangerous reactions known under normal conditions of use.
None under recommended storage and handling conditions (see section 7).
No additional information available
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.3. Bioaccumulative potential
Low potential for bioaccumulation (BCF < 500).
12.4. Mobility in soil
12.1. Toxicity
The product is not considered harmful to aquatic organisms nor to cause long-term adverse effects in the environment.
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
12.2. Persistence and degradability
12.2. Persistence and degradability
Not biodegradable.
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.5. Results of PBT and vPvB assessment
Both substances listed do not meet the PBT or vPvB criteria of REACH regulation, annex XIII.
12.6. Endocrine disrupting properties
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container in accordance with licensed collector’s sorting instructions.
Dispose of contents/container in accordance with licensed collector’s sorting instructions.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 210 Classic?
The signal word is no signal word.
What is the physical form of 210 Classic?
210 Classic is a liquid with white. color. It has not available odor.
What is the solubility of 210 Classic?
Partially soluble.
What is 210 Classic used for?
adhesives
What is the melting point of 210 Classic?
The melting point is ≈ 0 °C Not applicable and the boiling point is ≈ 100 (1013hPa).