Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 191 Black
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- H2HS-612D-G00W-16DR
Identified Uses
Stamp pad ink
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Noris-Color GmbH
manufacturer
Ziegelhüttener Str. 1, D-95326 KULMBACH, GERMANY
+499221/9200-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Dipropylene glycol monomethyl ether EC: 252-104-2 | 34590-94-8 | 25 - 50% | No |
| 1-methoxy-2-propanol EC: 203-539-1 | 107-98-2 | 25 - 50% | Yes |
| methyl 4-hydroxybenzoate EC: 202-785-7 | 99-76-3 | 2.5 - 10% | Yes |
| butan-1-ol EC: 200-751-6 | 71-36-3 | 2.5 - 10% | Yes |
| Parfum (for industrial use only) | --- | 2.5% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water.
Rinse out mouth and then drink plenty of water. If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, sand, extinguishing powder. Do not use water.
Water with full jet
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions are necessary if used correctly.
Keep container tightly sealed.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- PAINT
- Transport Class
- 3
- Packing Group
- III
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 191 Black?
The signal word is danger.
What is the physical form of 191 Black?
191 Black is a liquid with according to product specification color. It has characteristic odor.
What is 191 Black used for?
Stamp pad ink
What are the hazard statements for 191 Black?
This substance has 4 hazard statements:
- H226: Flammable liquid and vapour.
- H318: Causes serious eye damage.
- H336: May cause drowsiness or dizziness.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of 191 Black?
The melting point is Undetermined. .