Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- UNIREX N 3
- Product Code
- 2015A0207230, 644369-00, 97N712
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Grease
Manufacturers & Suppliers
EXXON MOBIL CORPORATION
manufacturer
22777 Springwoods Village Parkway, Spring, TX. 77389 USA
800-662-4525
http://www.exxon.com
Emergency Contacts
Emergency Contact
609-737-4411
CHEMTREC
800-424-9300
CHEMTREC
703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-NAPHTHYLAMINE, N-PHENYL- | 90-30-2 | 0.1 - 1% | Yes |
| DINONYL NAPHTHALENESULFONIC ACID, BARIUM SALT | 25619-56-1 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Wash contact areas with soap and water.
Symptoms: minimal or absent
Flush thoroughly with water.
Symptoms: irritation
First aid is normally not required.
Symptoms: discomfort
Immediate Medical Attention
If product is injected into or under the skin, or into any part of the body, regardless of the appearance of the wound or its size, the individual should be evaluated immediately by a physician as a surgical emergency. If irritation occurs, get medical assistance. Seek medical attention if discomfort occurs.
Medical Treatment
early surgical treatment within the first few hours may significantly reduce the ultimate extent of injury.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.
Straight Streams of Water
Evacuate area. Prevent runoff from fire control or dilution from entering streams, sewers, or drinking water supply. Firefighters should use standard protective equipment and in enclosed spaces, self-contained breathing apparatus (SCBA). Use water spray to cool fire exposed surfaces and to protect personnel.
Firefighter Protection
Firefighters should use standard protective equipment and in enclosed spaces, self-contained breathing apparatus (SCBA).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop leak if you can do it without risk.
normal antistatic work clothes are usually adequate.
full body suit of chemical resistant, antistatic material is recommended.
Prevent entry into waterways, sewers, basements or confined areas.
Scrape up spilled material with shovels into a suitable container for recycle or disposal. Skim from surface.
Materials: shovels, suitable container
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin. Prevent small spills and leakage to avoid slip hazard.
Do not store in open or unlabelled containers.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
See sub-sections below.
Hazardous polymerization will not occur.
Excessive heat. High energy sources of ignition.
Strong oxidizers
Material does not decompose at ambient temperatures.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
ECOTOXICITY
Material is not expected to be harmful to aquatic organisms.
PERSISTENCE AND DEGRADABILITY
Base oil component is expected to be inherently biodegradable.
BIOACCUMULATION POTENTIAL
Base oil component has the potential to bioaccumulate, however metabolism or physical properties may reduce the bioconcentration or limit bioavailability.
MOBILITY
Base oil component has low solubility and is expected to migrate from water to land and partition to sediment and wastewater solids.
Ecotoxicity
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
burning in an enclosed controlled burner for fuel value or disposal by supervised incineration at very high temperatures
Product is suitable for burning in an enclosed controlled burner for fuel value or disposal by supervised incineration at very high temperatures to prevent formation of undesirable combustion products.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This material is not considered hazardous in accordance with OSHA HazCom 2012, 29 CFR 1910.1200.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for UNIREX N 3?
The signal word is no signal word.
What is the physical form of UNIREX N 3?
UNIREX N 3 is a solid with green color. It has characteristic odor.
What is UNIREX N 3 used for?
Grease
What is the melting point of UNIREX N 3?
The melting point is N/D and the boiling point is N/D.