Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MANGALOX C
- Product Form
- Substance
- Product Code
- C 45
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For use in: Bricks, Roof tiles.
Uses advised against
This product must not be used in applications other than those identified above, without first seeking advice of the supplier
Manufacturers & Suppliers
SCR-Sibelco NV
manufacturer
Plantin en Moretuslei 1A, 2018 Antwerpen - Belgium
Sibelco Geertruidenberg
manufacturer
Centraleweg 52, 4931 NB Geertruidenberg - The Netherlands
+31 (0)43 3663636
Sibelco Winterswijk
manufacturer
Steengroeveweg 50, 7101 PH Winterswijk - The Netherlands
+31 (0)543 561461
Emergency Contacts
Sibelco
+31 43 3663755
during office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Braunite, brown EC: 305-405-9 | 94551-57-2 | 100% | No |
Notes
E: Exempted from REACH registration
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the affected person away from the contaminated area and into the fresh air.
No special first aid measures necessary.
Rinse with copious quantities of water and seek medical attention if irritation persists.
No first aid measure required.
Medical Treatment
No special first aid measures necessary.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
No specific extinguishing media is needed.
No restriction on the extinguishing media to be used.
Not combustible.
Firefighter Protection
No specific fire-fighting protection is required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid airborne dust generation
No special requirements.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid airborne dust generation. Handle packaged products carefully to prevent accidental bursting. If you require advice on safe handling techniques, please contact your supplier.
Keep containers closed and store packaged products so as to prevent accidental bursting.
Do not eat, drink and smoke in work areas; wash hands after use; remove contaminated clothing and protective equipment before entering eating areas.
To avoid thermal decomposition, do not overheat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Minimise airborne dust generation. Use process enclosures, local exhaust ventilation or other engineering controls to keep airborne levels below specified exposure limits. If user operations generate dust, fumes or mist, use ventilation to keep exposure to airborne particles below the exposure limit. Apply organisational measures, e.g. by isolating personnel from dusty areas. Remove and wash soiled clothing. See annex for more detailed information.
Appropriate protection (e.g. gloves, barrier cream) is recommended for workers who suffer from dermatitis or sensitive skin. Wash hands at the end of each work session.
Wear safety glasses with side-shields in circumstances where there is a risk of penetrative eye injuries.
In case of prolonged exposure to airborne dust concentrations, wear a respiratory protective equipment that complies with the requirements of European or national legislation. The use of half or full face masks with filters against particles of category 2 or 3 (FP2 - FP3) is recommended. See EN 143: 2021 - Respiratory protective devices. Particle filters
No specific requirement. Appropriate protection (e.g. gloves, barrier cream) is recommended for workers who suffer from dermatitis or sensitive skin. Wash hands at the end of each work session.
Avoid wind dispersal.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Chemically stable.
Inert, not reactive.
No hazardous reactions.
To avoid thermal decomposition, do not overheat.
Oxidising agents. Strong acids. Alkalis. Chlorates. Reducing agents. Hydrogen peroxide.
Thermal decomposition can lead to the release of irritating gases and vapours: Manganese compounds.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
The substance is not classified as hazardous to the aquatic environment.
12.2. Persistence and degradability
Not relevant.
12.3. Bioaccumulative potential
The substance is a solid inorganic material, therefore the partition coefficient is not applicable. Bioaccumulation is considered not relevant, although some organisms may accumulate Si(OH)4.
12.4. Mobility in soil
No information available.
12.5. Results of PBT and vPvB assessment
The substance is not considered relevant for PBT/vPvB assessment.
12.6. Endocrine disrupting properties
Contains no substances identified as having endocrine disrupting properties
12.7. Other adverse effects
No specific adverse effects known
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Where possible recycling is preferred to disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No additional information available
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MANGALOX C?
The signal word is no signal word.
What is the physical form of MANGALOX C?
MANGALOX C is a solid appearing as powder with brown, black color. It has odourless odor.
What is the solubility of MANGALOX C?
Water: Insoluble
What is MANGALOX C used for?
For use in: Bricks, Roof tiles.
What is the melting point of MANGALOX C?
The melting point is > 800 °C and the boiling point is Not applicable (solid inorganic substance).