Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Klercide Low Residue Quat
- Product Code
- 116958E
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Surface disinfectant. Manual process Surface disinfectant. Spray and rinse manual process
Uses advised against
Reserved for industrial and professional use.
Manufacturers & Suppliers
Ecolab Ltd.
manufacturer
PO Box 11; Winnington Avenue Northwich, Cheshire, United Kingdom CW8 4DX
+44 (0)1606 74488
Emergency Contacts
Emergency Contact
+441618841235
Trans-European
+32-(0)3-575-5555
Poison Information Centre
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
No hazardous ingredients
First Aid Measures
Emergency procedures for chemical exposure incidents
Rinse with plenty of water.
Rinse with plenty of water.
Rinse mouth.
Immediate Medical Attention
Get medical attention if symptoms occur.
Medical Treatment
No specific measures identified.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
None known.
Not flammable or combustible.
Firefighter Protection
Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Advice for non-emergency personnel : Refer to protective measures listed in sections 7 and 8. Advice for emergency responders : If specialised clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials.
dike spilled material or otherwise contain material to ensure runoff does not reach a waterway.
No special environmental precautions required.
collect with non-combustible absorbent material, and place in container for disposal according to local / national regulations (see section 13). Flush away traces with water.
Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Klercide Low Residue Quat
---
Klercide Neutral Detergent
---
Premier Klercide-CR Sterile Biocide Y Unit Dose Concentrate, Klercide-CR Biocide Y Unit Dose Concentrate
---
KLERCIDE SPORICIDAL LOW RESIDUE PEROXIDE
---
KLERWIPE SPORICIDAL LOW RESIDUE PEROXIDE
---
Klercide 70/30 IPA
---
Clinell Drain Disinfectant
---
Liquichek™ Elevated CRP Control
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands after handling. In case of mechanical malfunction, or if in contact with unknown dilution of product, wear full Personal Protective Equipment (PPE). For personal protection see section 8.
Keep out of reach of children. Keep container tightly closed. Store in suitable labeled containers.
Wash hands before breaks and immediately after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Good general ventilation should be sufficient to control worker exposure to airborne contaminants.
No special protective equipment required.
No special protective equipment required.
None required if airborne concentrations are maintained below the exposure limit listed in Exposure Limit Information. Use certified respiratory protection equipment meeting EU requirements(89/656/EEC, (EU) 2016/425), or equivalent, when respiratory risks cannot be avoided or sufficiently limited by technical means of collective protection or by measures, methods or procedures of work organization.
No special protective equipment required.
Consider the provision of containment around storage vessels.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
No dangerous reaction known under conditions of normal use.
None known.
None known.
Not applicable.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
This product has no known ecotoxicological effects.
12.2 Persistence and degradability
no data available
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Diluted product can be flushed to sanitary sewer if regulations permit.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Klercide Low Residue Quat?
The signal word is no signal word.
What is the physical form of Klercide Low Residue Quat?
Klercide Low Residue Quat is a liquid appearing as liquid with light yellow color. It has slight odor.
What is Klercide Low Residue Quat used for?
Surface disinfectant. Manual process Surface disinfectant. Spray and rinse manual process
What is the melting point of Klercide Low Residue Quat?
The melting point is Not applicable and/or not determined for the mixture and the boiling point is Not applicable and/or not determined for the mixture.