Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- KLERWIPE SPORICIDAL LOW RESIDUE PEROXIDE
- Product Form
- AL - Any other liquid
- Product Code
- 118380E
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Surface disinfectant. Manual process; Biocide. Manual process
Uses advised against
Reserved for industrial and professional use.
Manufacturers & Suppliers
Ecolab Ltd.
manufacturer
PO Box 11; Winnington Avenue, Northwich, Cheshire, United Kingdom CW8 4DX
+44 (0)1606 74488
Emergency Contacts
Emergency Contact
+441618841235
Trans-European
+32-(0)3-575-5555
Poison Information Centre
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrogen peroxide EC: 231-765-0 | 7722-84-1 | 5 - 8% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Get medical attention if symptoms occur.
Rinse with plenty of water.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention.
Rinse mouth. Get medical attention if symptoms occur.
Immediate Medical Attention
Get medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
None known.
Not flammable or combustible.
In the event of fire and/or explosion do not breathe fumes.
Firefighter Protection
Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure clean-up is conducted by trained personnel only. Refer to protective measures listed in sections 7 and 8.
Do not allow contact with soil, surface or ground water. DO NOT hermetically seal any defective containers, including drums (risk of bursting due to the decomposition of the product)
Sweep up and shovel into suitable containers for disposal.
Materials: suitable containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Use only with adequate ventilation. Wash hands thoroughly after handling. In case of mechanical malfunction, or if in contact with unknown dilution of product, wear full Personal Protective Equipment (PPE).
Protect from frost, heat and sunlight. Store at room temperature in the original container. Keep out of reach of children. Keep container tightly closed. Store in suitable labeled containers. Do not hermetically seal the container. Risk of overpressure and bursting in the event of decomposition in closed containers and in pipes.
Handle in accordance with good industrial hygiene and safety practice. Remove and wash contaminated clothing before re-use. Wash face, hands and any exposed skin thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Good general ventilation should be sufficient to control worker exposure to airborne contaminants.
In case of skin contact it is recommended to wear gloves to avoid oxidation effect (e.g. skin whitening) (EN 374)
Safety glasses with side-shields (EN 166)
When respiratory risks cannot be avoided or sufficiently limited by technical means of collective protection or by measures, methods or procedures of work organization, consider the use of certified respiratory protection equipment meeting EU requirements (89/656/EEC, (EU) 2016/425), or equivalent, with filter type:B (EN 143, 14387)
No special protective equipment required. (EN 14605)
Consider the provision of containment around storage vessels.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Decomposes on heating. Contamination may result in dangerous pressure increases - closed containers may rupture.
No dangerous reaction known under conditions of normal use.
No dangerous reaction known under conditions of normal use.
None known.
None known.
Depending on combustion properties, decomposition products may include following materials: Not applicable.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of contents/container in accordance with local regulations. Dispose of wastes in an approved waste disposal facility.
Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of contents/container in accordance with local regulations. Dispose of wastes in an approved waste disposal facility.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not dangerous goods
- Shipping Name
- Not dangerous goods
- Transport Class
- Not dangerous goods
- Packing Group
- Not dangerous goods
Regulatory Information
Chemical regulations, safety assessments, and compliance status
according to Detergents Regulation EC 648/2004 : 5 % or over but less than 15 %: Oxygen-based bleaching agents
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for KLERWIPE SPORICIDAL LOW RESIDUE PEROXIDE?
The signal word is warning.
What is the physical form of KLERWIPE SPORICIDAL LOW RESIDUE PEROXIDE?
KLERWIPE SPORICIDAL LOW RESIDUE PEROXIDE is a absorbed liquid (wipes, pads, ...) appearing as absorbed liquid (wipes, pads, ...) with clear, colourless color. It has pungent odor.
What is KLERWIPE SPORICIDAL LOW RESIDUE PEROXIDE used for?
Surface disinfectant. Manual process; Biocide. Manual process
What are the hazard statements for KLERWIPE SPORICIDAL LOW RESIDUE PEROXIDE?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of KLERWIPE SPORICIDAL LOW RESIDUE PEROXIDE?
The melting point is Not applicable and/or not determined for the mixture and the boiling point is > 100 °C.