SÜDWEST 2K-Acryl-Lack Streichlack-Zusatz

Move to fresh air in case of accidental inhalation of vapours or decomposition products. Consult a physician after significant exposure.

Take off contaminated clothing and shoes immediately. Take off contaminated clothing and wash it before reuse. Wash skin thoroughly with soap and water or use recognized skin cleanser. Do NOT use solvents or thinners. If symptoms persist, call a physician.

Symptoms: Contact with skin causes irritation. Repeated or prolonged skin contact may cause skin irritation and/or dermatitis and sensitisation of susceptible persons.

In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Consult a physician.

Symptoms: Contact with eyes causes irritation.

Never give anything by mouth to an unconscious person. Clean mouth with water and drink afterwards plenty of water. Do NOT induce vomiting. Obtain medical attention.

CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

High volume water jet

Use water spray to cool unopened containers.

Do not breathe fumes / aerosol. Do not get in eyes, on skin, or on clothing. Use personal protective equipment.

Prevent seepage into sewage system, workpits and cellars. Do not allow contact with soil, surface or ground water.

Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). Subsequently put in the waste container. Do not seal ( CO2 may be given off ) Clean contaminated surface thoroughly.

Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite), Water

Avoid contact with skin and eyes. Do not breathe vapours or spray mist. Persons with a history of skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used. Comply with the statutory regulations on health and safety at work. Do not re-use empty containers.

Keep out of reach of children. Store in original container. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Protect from frost, heat and sunlight. Keep in a dry place.

Take off immediately all contaminated clothing. Keep working clothes separately. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Wash hands before breaks and immediately after handling the product. After washing hands, replenish lost skin oil by means of oily skin ointment. When using do not eat, drink or smoke.

Ensure good ventilation; if possible, use / install internal extractor equipment.

Gloves made of the following materials are suitable as protection from splashes: Gloves made of nitrile rubber, e.g. KCL 730 Camatril® Velours (Kächele-Cama-Latex GmbH, Hotline: 0049(0)6659-87-300, kcl-uk@kcl.de), or equivalent. Wetted gloves must be disposed of immediately! Wearing time: < 60 min, Minimum thickness: 0,4 mm. Gloves in the following material can be used for prolonged contact up to max. 8 hours: Fluorocarbon rubber gloves eg. KCL 890 Vitoject® (Kächele-Cama-Latex GmbH, Hotline: 0049(0)6659-87-300, kcl-uk@kcl.de), or equal. Dispose of wetted gloves at the end of the shift! Wearing time: > 480 min, Minimum thickness: 0,7 mm. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. Cotton undergloves are recommendable when wearing protective gloves! To avoid skin problems reduce the wearing of gloves to the required minimum. Only use chemical-protective gloves with CE-labelling of category III.

Safety glasses with side-shields conforming to EN166

In case of insufficient ventilation, wear suitable respiratory equipment. Breathing apparatus with filter. Respiratory protection must be worn when mixing or decanting these components > 1 hour / day. Recommended Filter type: Filter A/P2, or self-contained breathing apparatus. With spray application: Indoor: Carry out in a vented booth or extracted enclosure. Avoid carrying out operation for more than 1 hour. Outdoor: Ensure operation is undertaken outdoors. Avoid carrying out operation for more than 4 hours. For rescue and maintenance work in storage tanks use self-contained breathing apparatus.

Impervious clothing. If splashes are likely to occur, wear: Solvent-resistant apron and boots

Prevent seepage into sewage system, workpits and cellars. Do not allow contact with soil, surface or ground water. If the product contaminates rivers and lakes or drains inform respective authorities.

Stable under normal conditions.

Container can be pressurized by carbon dioxide due to reaction with humid air and/or water.

Amines and alcohols cause exothermic reactions.

Direct sources of heat. Strong sunlight for prolonged periods.

oxidizing agents, strongly alkaline and strongly acid materials

CO2

Unhardened product residues should be disposed of under the recommended waste code number.

The user is responsible for proper coding and marking of any waste.