Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Wet Lube Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None.
Manufacturers & Suppliers
Finish Line Technologies, Inc.
manufacturer
50 Wireless Blvd., Hauppauge, NY 11788, USA
+1 (631) 666-7300
Madison Distribution Centre
distributor
5 Roebuck Way, Knowhill, Milton Keynes, Buckinghamshire, MK5 8HL, United Kingdom
+44 1908 326032
Emergency Contacts
PROSAR
1-800-217-5157
24 hr
PROSAR
1-651-523-0304
24 hr
CHEMTREC
1-800-424-9300
24 hr
CHEMTREC
1 (703) 527-3887
24 hr
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Lubricating oils (petroleum), C15-30, hydrotreated neutral oil-based EC: 276-737-9 | 72623-86-0 | 50 - 85% | No |
| Propane EC: 200-827-9 | 74-98-6 | 5 - 15% | Yes |
| Butane EC: 203-448-7 | 106-97-8 | 5 - 15% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move person to fresh air. If breathing is laboured, administer oxygen.
Wash affected skin with soap and water.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Do not give anything by mouth to an unconscious person.
Immediate Medical Attention
If symptoms develop, obtain medical attention. Seek medical treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish with carbon dioxide, dry chemical, foam or waterspray.
Do not use water jet.
Highly flammable vapour (flash point below 23°C).
Keep containers cool by spraying with water if exposed to fire.
Firefighter Protection
A self contained breathing apparatus and suitable protective clothing should be worn in fire conditions.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent substance entering sewers.
Transfer to a container for disposal or recovery.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat/sparks/open flames/hot surfaces. – No smoking. Avoid contact with skin and eyes. Use product in a well-ventilated area only.
Keep container in a well-ventilated place. Store at temperatures not exceeding 38°C/100°F.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only with adequate ventilation to keep exposures (airborne levels of dust, fume, vapour etc) below recommended exposure limits.
Wear protective gloves.(Nitrile rubber)
Wear protective eyewear (goggles, face shield, or safety glasses).
Normally no personal respiratory protection is necessary. In case of insufficient ventilation, wear suitable respiratory equipment.
Wear protective gloves.(Nitrile rubber)
None assigned.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under normal conditions.
None anticipated.
Avoid contact with heat and ignition sources.
Strong oxidising agents.
None known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No short-term or long-term toxicity data available for the substance.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance is not classified as PBT or vPvB.
12.6 Other adverse effects
None known.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal should be in accordance with local, state or national legislation. Consult an accredited waste disposal contractor or the local authority for advice.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- Aerosols, flammable
- Transport Class
- 2.1
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
15.1.1 EU regulations; 15.1.2 National regulations: Not established.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Wet Lube Aerosol?
The signal word is danger.
What is the physical form of Wet Lube Aerosol?
Wet Lube Aerosol is a liquid appearing as liquid with colourless color. It has not available odor.
What is Wet Lube Aerosol used for?
Lubricant
What are the hazard statements for Wet Lube Aerosol?
This substance has 2 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
What is the melting point of Wet Lube Aerosol?
The melting point is Not available and the boiling point is Not available.