Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- C 170 COLORANTE NERO FE-MN
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For industrial or professional use only.
Manufacturers & Suppliers
Smalticeram Unicer S.p.A.
manufacturer
Via Della Repubblica 10/12 - Castellarano (RE) - Italy
Emergency Contacts
Emergency Contact
+39 0536 864890
08:00-12:00 14:00-18:00
Antipoison Center - Ospedale Niguarda Ca' Granda - Milan
+39 02 66101029
H24
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous components within the meaning of EEC directive 67/548 and CLP regulation and related classification: None.
First Aid Measures
Emergency procedures for chemical exposure incidents
Ventilate the premises. The patient is to be removed immediately from the contaminated premises and made to rest in a well ventilated area. Should the patient feel unwell, OBTAIN MEDICAL ATTENTION.
Wash with plenty of water and soap. Do not use solvents or diluents.
Remove contact lenses. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Do not give anything that is not prescribed by the doctor. Do not under any circumstances induce vomiting. OBTAIN A MEDICAL EXAMINATION IMMEDIATELY.
Immediate Medical Attention
OBTAIN A MEDICAL EXAMINATION IMMEDIATELY (ingestion). OBTAIN MEDICAL ATTENTION (inhalation). Seek medical advice (eye contact).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water. Carbon dioxide (CO2).
Do not use jets of water but only spray water.
Do not inhale explosion and combustion gases.
Water is not effective for putting out fires but can be used to cool containers exposed to flames to prevent explosions.
Firefighter Protection
Use suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear personal protection equipment. Remove persons to safety. See protective measures under point 7 and 8.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it.
Wash with plenty of water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Never use pressure to empty. Container is not a pressure vessel. Avoid contact with skin and eyes, inhalation of vapours and mists. Do not pour the product into other containers. Always use the original container. See also section 8 for recommended protective equipment.
Cool and adequately ventilated.
Do not eat or drink while working. Do not smoke while working.
Keep away from unguarded flame, sparks, and heat sources.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
For prolonged or repeated handling, use nitrile rubber gloves (at least category II, thickness 0.1mm and class 3). The instructions and information provided by the glove manufacturer on use, storage, maintenance and replacement must be followed. Gloves should be replaced regularly and if there is any sign of damage to the glove material. Always ensure that gloves are free from defects and that they are stored and used correctly. The performance or effectiveness of the glove may be reduced by physical/chemical damage and poor maintenance.
If splashing is likely to occur or for occupational exposures, wear appropriate eye protection.
If the threshold value (if available) for one or more of the substances present in the preparation for daily exposure in the workplace or to a fraction established by the company's prevention and protection service is exceeded, wear a mask with an A filter. The class (1, 2 or 3) of which must be chosen according to the limit concentration of use (ref. standard EN 141). Make sure the PPE used is as efficient as possible.
In the presence of risks of exposure to splashes or squirts during work, adequate mouth and nose protection should be used to prevent accidental absorption.
Do not allow to enter drains, sewers or watercourses.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
Stable under normal conditions
Keep away from unguarded flame, sparks, and heat sources. Avoid direct exposure to sunlight. Avoid accumulating electrostatic charge.
None in particular.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Endocrine disrupting properties
12.7. Other adverse effects
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
Not Applicable
12.5. Results of PBT and vPvB assessment
The components of the mixture on the basis of available information, do not meet the PBT and vPvB criteria.
12.6. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers. All components of the product must be disposed of in accordance with the respective national environmental laws.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for C 170 COLORANTE NERO FE-MN?
The signal word is no signal word.
What is the physical form of C 170 COLORANTE NERO FE-MN?
C 170 COLORANTE NERO FE-MN is a solid appearing as granules and powder, black color with black color. It has odourless odor.
What is C 170 COLORANTE NERO FE-MN used for?
For industrial or professional use only.
What is the melting point of C 170 COLORANTE NERO FE-MN?
The melting point is 500-1000°C and the boiling point is Not requested for subsytances/mixtures with melting point >300°C.