NextSDS Logo
Safety Data Sheet EN

C 136 OSSIDO COLORANTE DA IMPASTO NERO

CAS 12737-27-8
EC 235-790-8

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
C 136 OSSIDO COLORANTE DA IMPASTO NERO
Chemical Name
Chromium iron oxide

Regulatory Identifiers

CAS Number
12737-27-8 Check regulations →
EC Number
235-790-8 Check regulations →
REACH No.
01-2119486820-33-xxxx

Identified Uses

For industrial or professional use only.

Manufacturers & Suppliers

S

Smalticeram Unicer S.p.A.

manufacturer

Via Della Repubblica 10/12 - Castellarano (RE) - Italy

Emergency Contacts

Emergency Contact

+39 0536 864890

08:00-12:00 14:00-18:00

Antipoison Center - Ospedale Niguarda Ca’ Granda - Milan

+39 02 66101029

H24

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Identification of the substance: Chemical characterization: Chromium iron oxide CAS number: 12737-27-8 EC number: 235-790-8 REACH number: 01-2119486820-33 -xxxx

Chemical Name CAS Number Concentration Hazardous
Chromium iron oxide EC: 235-790-8 12737-27-8 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Ventilate the premises. The patient is to be removed immediately from the contaminated premises and made to rest in a well ventilated area. Should the patient feel unwell, OBTAIN MEDICAL ATTENTION.

Skin contact

Wash with plenty of water and soap. Do not use solvents or diluents.

Eye contact

Remove contact lenses. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Ingestion

Do not give anything that is not prescribed by the doctor. Do not under any circumstances induce vomiting. OBTAIN A MEDICAL EXAMINATION IMMEDIATELY.

Immediate Medical Attention

OBTAIN A MEDICAL EXAMINATION IMMEDIATELY (Ingestion). OBTAIN MEDICAL ATTENTION (Inhalation). Seek medical advice (Eyes).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water. Carbon dioxide (CO2).

Unsuitable media

Do not use jets of water but only spray water.

Specific hazards

Do not inhale explosion and combustion gases.

Instructions

Water is not effective for putting out fires but can be used to cool containers exposed to flames to prevent explosions.

Firefighter Protection

Use suitable breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear personal protection equipment. Remove persons to safety.

Environmental

Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it.

Cleanup methods

Wash with plenty of water.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Never use pressure to empty. Container is not a pressure vessel. Avoid contact with skin and eyes, inhalation of vapours and mists. Do not pour the product into other containers. Always use the original container.

Storage

Cool and adequately ventilated.

Hygiene

Do not eat or drink while working. Do not smoke while working.

Fire prevention

Keep away from unguarded flame, sparks, and heat sources.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

For prolonged or repeated handling, use nitrile rubber gloves (at least category II, thickness 0,1mm and class 3). The instructions and information provided by the glove manufacturer on use, storage, maintenance and replacement must be followed. Gloves should be replaced regularly and if there is any sign of damage to the glove material. Always ensure that gloves are free from defects and that they are stored and used correctly. The performance or effectiveness of the glove may be reduced by physical/chemical damage and poor maintenance.

Eyes

If splashing is likely to occur or for occupational exposures, wear appropriate eye protection.

Respiratory

If the threshold value (if available) for one or more of the substances present in the preparation for daily exposure in the workplace or to a fraction established by the company`s prevention and protection service is exceeded, wear a mask with an A filter. The class (1, 2 or 3) of which must be chosen according to the limit concentration of use (ref. standard EN 141). Make sure the PPE used is as efficient as possible.

Skin/Body

In the presence of risks of exposure to splashes or squirts during work, adequate mouth and nose protection should be used to prevent accidental absorption.

Environmental

Do not allow to enter drains, sewers or watercourses.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flammability
Not inflammable
Kinematic Viscosity
---
Melting Point
500 - 1000 °C
Density
---
Properties Status
---
Solidification Point
---
Molecular Weight
---
Physical State
solid
Solubility In Water
Insoluble
Boiling Point
Not requested for subsytances/mixtures with melting point >300°C
Ph
Not applicable
Colour
Black
Freezing Point
---
Appearance
Powder, Black
Relative Evaporation Rate
---
Auto Ignition Temperature
Not auto-flammable
Lower Explosive Limit
---
Vapor Density
Not Available
Relative Density
---
Colour Intensity
---
Dynamic Viscosity
---
Crystallisation Point
---
Vapor Pressure
Not Available
Odor
Odourless
Form
Powder
Solubility In Fat
---
Solubility
---
Cloud Point
---
Physical State Data
solid
Flash Point
Not Applicable
Upper Explosive Limit
---
Metal Corrosion
---
Decomposition Temperature
---
Odor Threshold
Not Applicable
Softening Point
---
State Under Standard Conditions
---
Voc Content
---
Explosive Limits
---
Partition Coefficient
Not Available
Evaporation Rate
---
Bulk Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions

Reactivity

Stable under normal conditions

Avoid

Keep away from unguarded flame, sparks, and heat sources. Avoid direct exposure to sunlight. Avoid accumulating electrostatic charge.

Incompatible

None in particular.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for C 136 OSSIDO COLORANTE DA IMPASTO NERO?

The signal word is no signal word.

What is the physical form of C 136 OSSIDO COLORANTE DA IMPASTO NERO?

C 136 OSSIDO COLORANTE DA IMPASTO NERO is a solid appearing as powder, black with black color. It has odourless odor.

What is C 136 OSSIDO COLORANTE DA IMPASTO NERO used for?

For industrial or professional use only.

What is the melting point of C 136 OSSIDO COLORANTE DA IMPASTO NERO?

The melting point is 500 - 1000 °C and the boiling point is Not requested for subsytances/mixtures with melting point >300°C.