Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CROMOFIX MARRON / BROWN 07B262
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coloration / Aditivation of plastic materials
Manufacturers & Suppliers
IQAP MASTERBATCH GROUP S.L.U.
manufacturer
Crta. de Vic a Olot, Km 5, 08510 LES MASIES DE RODA, Barcelona
IQAP MASTERBATCH GROUP S.L.U.
manufacturer
C/ Guadalajara, 6, Ap 299 03440 IBI, Alicante
+34 96 555 49 49
Emergency Contacts
Emergency Contact
+34 93 850 00 66
From 8:00 a.m. to 6:00 p.m. Monday to Friday
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Dispersion of pigments or colourants in a PVC
Notes
The mixture contained in the polymer presents no risk to human health by inhalation or contact with the skin in the form in which it is marketed.
First Aid Measures
Emergency procedures for chemical exposure incidents
Make sure the victim breathes pure air. Remove the victim from the place of exposure. Seek medical attention
Remove affected clothing and wash the entire area of skin exposed to the product with mild soap and water; then, rinse with hot water.
Thoroughly wash the victim’s eyes for 15 minutes with running water and with the eyelids open. If the eye irritation persists, consult a doctor.
Rinse the mouth out immediately and give plenty of water to drink. If the person is conscious, make them vomit. Seek emergency medical attention.
Immediate Medical Attention
Seek medical attention (inhalation), consult a doctor (eyes), seek emergency medical attention (swallowing).
Medical Treatment
Symptomatic treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam Extinguishing powder. Carbon dioxide. Water mist.
Do not apply a direct stream of water
The gases determining the hazard are: hydrogen chloride and toxic fumes.
Use water mist to cool fire-exposed containers.
Firefighter Protection
Do not enter the fire area without special protection clothing and protected with self-contained respiratory equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate the area. Equip staff with the appropriate means of protection (see Section 8). Evacuate the area and keep unprotected staff members away.
Prevent the substance from entering drains and water pipes. Prevent it from being released into the environment.
If it is in the ground, remove by mechanical means in order to deposit it in appropriate containers.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash thoroughly after handling. Follow the recommendations regarding general hygiene measures in the workplace, such as: a) Do not eat, drink or smoke in work areas b) Wash hands after every use, and c) remove contaminated clothing and protective equipment before entering the areas for eating.
Store only in the original container and in a cool and well-ventilated place. Keep the storage temperature below 35°C. Keep the container closed when not in use. Caution: Risk of slipping.
Do not eat, drink or smoke in work areas. Wash hands after every use. Remove contaminated clothing and protective equipment before entering the areas for eating.
Avoid the accumulation of electrostatic charges. Eliminate the possible sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear gloves that are resistant to chemical products (EN 374):E.g.: nitrilic
Chemical goggles or safety glasses (EN 166) e.g.: glasses with a frame and side protection
No special measures are required.
Due to the product's colouring properties, a closed protective suit should be used to avoid staining during handling.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
See Section 10.3 "Possibility of hazardous reactions".
In the form supplied, the product is not likely to cause explosions
Direct sunlight. Extremely high or extremely low temperatures
Strong acids. Strong alkalis. Strong oxidants.
Decomposes at temperatures above 200 °C. Carbon monoxide and nitrous gases
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of this material and its container at a collection point for hazardous or special waste, in accordance with local, regional, national or international regulations.
Dispose of this material at a collection point for hazardous or special waste, in accordance with local, regional, national or international regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Ensure that local and national regulations are complied with.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CROMOFIX MARRON / BROWN 07B262?
The signal word is no signal word.
What is the physical form of CROMOFIX MARRON / BROWN 07B262?
CROMOFIX MARRON / BROWN 07B262 is a solid in granules with marron / brown color. It has odourless odor.
What is CROMOFIX MARRON / BROWN 07B262 used for?
Coloration / Aditivation of plastic materials