AZ 300 MIF Developer

fresh air. Immediately call in physician. If breathing stops: immediately apply artificial respiration, if necessary also oxygen.

Symptoms: Cough, Shortness of breath, respiratory arrest

Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately. If a systemic effect is suspected, monitoring and treatment in an intensive care unit is urgently required.

Symptoms: Irritation and corrosion

rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.

Symptoms: Risk of blindness!

make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.

Symptoms: Nausea, Vomiting, Abdominal pain, Diarrhoea

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

For this substance/mixture no limitations of extinguishing agents are given.

Not combustible. Ambient fire may liberate hazardous vapours.

Suppress (knock down) gases/vapours/mists with a water spray jet.

Do not breathe vapours, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not flush into surface water or sanitary sewer system.

Cover drains. Collect, bind, and pump off spills. Take up carefully with liquid-absorbent material (e.g. Chemizorb®). Dispose of properly. Clean up affected area.

Materials: liquid-absorbent material (e.g. Chemizorb®)

Observe label precautions.

Store in original container. No metal containers. Tightly closed. Keep in a well-ventilated place. Keep locked up or in an area accessible only to qualified or authorised persons.

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.

full contact Glove material : natural latex Glove thickness : 0.6 mm Break through time : 480 min splash contact Glove material : Nitrile rubber Glove thickness : 0.11 mm Break through time : 10 min The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example:KCL 706 Lapren®(full contact);KCL 741 Dermatril® L(splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types.

Tightly fitting safety goggles

required when vapours/aerosols are generated. Recommended Filter type: Filter A-(P2) The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled and must meet the specifications of a standard EN/ISO/DIN. The chemical resistance of the protective equipment should be enquired at the respective supplier. Full protective suit

Do not flush into surface water or sanitary sewer system.

The product is chemically stable under standard ambient conditions (room temperature).

See section 10.3

Violent reactions possible with: The generally known reaction partners of water. Risk of explosion with: Potassium peroxide. Risk of ignition or formation of inflammable gases or vapours with: Metals

no information available

Metals (Aluminium, Zinc, Tin, bronze). Gives off hydrogen by reaction with metals.

in the event of fire: See section 5.

Notice Directive on waste 2008/98/EC.

Leave chemicals in original containers. No mixing with other waste.