Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- OptiLyse C Lysing Solution
- Product Code
- A11895
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For In Vitro Diagnostic Use. See product literature for details.
Manufacturers & Suppliers
IMMUNOTECH S.A.S. a Beckman Coulter Company
manufacturer
130, avenue de Lattre de Tassigny, BP 177, 13276 Marseille cedex 9, France
(33) 491 172 727
Beckman Coulter, Inc.
national supplier
250 S. Kraemer Blvd, Brea, CA 92821, U.S.A.
800-854-3633
Beckman Coulter (UK) Ltd.
national supplier
Amersham Place, Little Chalfont, Buckinghamshire, United Kingdom, HP7 9NA
01494 441181
Beckman Coulter Canada LP
national supplier
7075 Financial Drive, Mississauga, ON L5N 6V8, Canada
1-800-463-7828
Beckman Coulter Australia Pty Ltd
national supplier
23-27 Chaplin Drive, Lane Cove NSW 2066, Australia
Beckman Coulter Eurocenter SA
national supplier
22, rue Juste-Olivier, Case Postale 1044, CH-1260 Nyon 1, Switzerland.
+41 (0)22 365 36 11
Beckman Coulter AB
national supplier
Ekbacksvägen 28, 168 69 Bromma, Sweden
+46 80564 85 900
Cherubino Ltd
distributor
DELF Building, Sliema Road, Gzira, GZR 1637, Malta
+356 21343270
Beckman Coulter Ireland Inc.
national supplier
Lismeehan O'Callaghan's Mills, Co. Clare, Ireland
353 (0)65 6831100
Emergency Contacts
Chemtrec
800-424-9300
24H
Chemtrec
(001) 703-527-3887
Poison Centre
1-844-764-7669
Centre antipoison du Québec
1-800-463-5060
Emergency Contact
999
National Poisons Information Centre
+353 (01) 809 2166
8:00 am to 10:00 pm 7 days a week
National Poisons Information Centre
+353 (01) 809 2566
24 hour service
Emergency Contact
1800 060 881
24 Hour
Emergency Contact
0800 446 109
24 Hour
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move exposed individual to fresh air. If individual is not breathing, begin artificial respiration by trained personnel and obtain medical attention immediately.
Rinse with plenty of water. Remove contaminated clothing and shoes. If pain or irritation occurs, obtain medical advice/attention.
Symptoms: Causes mild skin irritation. May cause an allergic skin reaction.
Rinse eyes gently with water for 15 minutes or longer, making sure that the eyelid is held open. If pain or irritation occurs, obtain medical advice/attention.
Symptoms: Causes serious eye irritation.
Rinse mouth with water. If irritation or discomfort occurs, obtain medical attention immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
In case of fire use carbon dioxide (CO2), dry chemical, water spray or foam. For large fires use extinguishing media suitable for surrounding fire.
No special hazards determined.
Firefighter Protection
Self-contained breathing apparatus is recommended for firefighters in all chemical fire situations.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Observe general safety guidelines for protection; avoid eye and skin contact.
Contain spill to prevent migration.
Absorb spilled material with an appropriate inert, non-flammable absorbent and dispose according to local regulations.
Materials: inert, non-flammable absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use good laboratory procedures; avoid eye and skin contact.
Store at 18 to 25°C, as directed on the product label. To maintain product quality, store according to the instructions in the product labeling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special engineering controls are required. Use with good general ventilation.
Wear impervious gloves such as Nitrile or equivalent. Refer to U.S. OSHA 29 CFR 1910.138, European Standard EN 374 or appropriate government standards.
Safety glasses or chemical goggles should be worn to prevent eye contact. Refer U.S. OSHA 29 CFR 1910.133, European Standard EN166 or appropriate government standards.
Under normal conditions, the use of this product should not require respiratory protection. If overexposure should occur and ventilation is not adequate to maintain airborne concentrations at acceptable levels, the use of respiratory protection should be evaluated by a qualified professional.
Wear protective clothing. Refer to U.S. OSHA 29 CFR 1910.138, European Standard EN 14605:2005+A1:2009 or appropriate government standards.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable in accordance with recommended storage conditions.
No further relevant information available.
No further relevant information available.
To maintain product performance keep away from strong acids, strong bases, strong oxidizers. Avoid exposure to heat and direct sunlight.
strong acids, strong bases, strong oxidizers
No decomposition products posing significant hazards would be expected from this product (an aqueous solution).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Chemical residues and remains should be routinely handled as special waste.
Dispose of in compliance with anti-pollution and other laws of the country concerned. Contact the relevant (local) authorities and/or an approved waste-disposal company for information.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
US Federal and State Regulations, EU Regulations, UK Regulations, Canada, China, Turkey, International
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for OptiLyse C Lysing Solution?
The signal word is danger.
What is the physical form of OptiLyse C Lysing Solution?
OptiLyse C Lysing Solution is a liquid with colorless color. It has mild aldehyde odor odor.
What is OptiLyse C Lysing Solution used for?
For In Vitro Diagnostic Use. See product literature for details.
What are the hazard statements for OptiLyse C Lysing Solution?
This substance has 4 hazard statements:
- H316: Causes mild skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H350: May cause cancer.