Yeast Cell Lysis Solution

Remove to fresh air and keep at rest in a comfortable position for breathing. If not breathing, give artificial respiration. Consult a physician.

Symptoms: Causes irritation to respiratory tract. Symptoms may include coughing and shortness of breath. May cause allergic reaction in sensitive individuals. upper respiratory irritation.

Remove affected clothing and wash all exposed skin for at least 15 minutes with tepid water. Consult a physician.

Symptoms: Can be cause irritation and dryness. A rash may develop with continuous exposure. May cause allergic skin reactions.

Immediately flush with plenty of tepid water for at least 15 minutes. Remove contact lenses if present and easy to do so. Continue rinsing. Consult a physician.

Symptoms: Causes irritation, redness, and pain.

Large amounts of water should be consumed, and consult a physician. Do not induce vomiting.

Symptoms: Large doses may cause gastrointestinal distress, nausea, and diarrhea.

Water spray, carbon dioxide, dry chemical powder, or appropriate foam.

Emits toxic fumes under fire conditions.

Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.

Ventilate area. Evacuate area. Keep upwind. Spill should be handled by trained clean-up crews.

Prevent entry to sewers and public waters. Avoid release to the environment.

Soak up spills with inert absorbants, such as sand or vermiculite as soon as possible. Place in closed waste container for disposal. Soap and water may be sued to clean up any residual material.

Materials: inert absorbants, such as sand or vermiculite

Do not handle until all safety precautions have been read and understood. Wear recommended personal protective equipment.

Do not store with oxidizing materials.

Wash hands and other exposed areas with mild soap and water after handling material, leaving the laboratory, before eating, drinking or smoking and when leaving work.

Provide adequate general and local exhaust ventilation. Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Ensure adequate ventilation, especially in confined areas.

Use gloves chemically resistant to this material when prolonged or repeated contact could occur. Gloves should be classified under Standard EN 374 or ASTM F1296. Suitable gloves for this specific application can be recommended by the glove supplier. Suggested glove materials are: Neoprene, Nitrile.

Safety goggles should be worn when working with mixture. Avoid direct contact with eyes.

Use NIOSH/MSHA-approved dust/particulate respirator. Where vapor, mist, or dust exceed PELs or other applicable OELs, use NIOSH-approved respiratory protective equipment. Do not breathe in vapour, mist, or dust.

Wear long sleeves, and chemically impervious PPE/coveralls to minimize bodily exposure as necessary.

Stable under use and storage conditions as recommended in section 7.

No dangerous reactions known under normal conditions of use.

None known. Hazardous polymerization does not occur.

Strong oxidants, heat flames, ignitions sources.

Strong oxidizing agents, acids.

Carbon monoxide, carbon dioxide, and sulfur oxides.

Obtain the consent of pollution control authorities before discharging to wastewater treatment plants. Product should not be discharged to surface waters without a NPDES permit.

Dispose in a safe manner in accordance with local, state, and federal regulations. Avoid release to the environment.