125I-labeled anti TSH antibody

If product is inhaled, move exposed individual to fresh air. If individual is not breathing, begin artificial respiration by trained personnel and obtain medical attention immediately.

In case of skin contact, rinse with water as a precaution.

If product enters eyes, rinse eyes gently with water as a precaution.

If product is ingested, rinse mouth with water. If irritation or discomfort occurs, obtain medical attention immediately.

In case of fire use carbon dioxide (CO2), dry chemical, water spray or foam. For large fires use extinguishing media suitable for surrounding fire.

No special hazards determined.

Observe general safety guidelines for protection during clean up procedures.

Do not allow the undiluted product to enter sewers/surface or ground water.

Place absorbed material in container suitable for disposal.

Materials: 1:10 bleach/water solution

This product should be handled as though capable of transmitting infectious diseases. Universal precautions should be followed when using this product.

Store at 2 to 8°C, as directed on the product label. To maintain product quality, store according to the instructions in the product labeling.

Place vial behind a metal shield, away from the user.

Wear impervious gloves such as Nitrile or equivalent. Refer to U.S. OSHA 29 CFR 1910.138, European Standard EN 374, EN 14605:2005+A1:2009 or appropriate government standards.

Safety glasses or chemical goggles should be worn to prevent eye contact. Refer U.S. OSHA 29 CFR 1910.133, European Standard EN166 or appropriate government standards.

Under normal conditions, the use of this product should not require respiratory protection. If overexposure should occur and ventilation is not adequate to maintain airborne concentrations at acceptable levels, the use of respiratory protection should be evaluated by a qualified professional.

Wear protective clothing. Refer to U.S. OSHA 29 CFR 1910.138, European Standard EN 374, EN 14605:2005+A1:2009 or appropriate government standards.

The product is stable in accordance with recommended storage conditions.

No further relevant information available.

Sodium azide forms explosive compounds with heavy metals. Repeated contact of low concentrations of azide with lead and copper commonly found in plumbing drains may result in the build up of shock sensitive compounds.

Avoid contact with incompatible materials. Avoid exposure to heat and direct sunlight.

Metals and metallic compounds

No decomposition products posing significant hazards would be expected from this product (an aqueous solution).

Chemical residues and remains should be routinely handled as special waste. Dispose of as potentially biohazardous waste.

Dispose of in compliance with anti-pollution and other laws of the country concerned. Contact the relevant (local) authorities and/or an approved waste-disposal company for information.