NextSDS Logo
Safety Data Sheet EN

WACKER CATALYST T 37

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
WACKER CATALYST T 37
Chemical Name
Not Applicable
Synonyms
Not Available

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Intermediate chemical. Use according to manufacturer's directions.

Manufacturers & Suppliers

Barnes Products P/L logo

Barnes Products P/L

national supplier

5 Greenhills Avenue Moorebank NSW 2170 Australia

+61 2 9793 7555

http://www.barnes.com.au/

Emergency Contacts

Barnes Products Pty Ltd

+61 2 9793 7555

Business Hours

Poisons Information Centre

13 1126

after hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 4
Skin Corr. Cat. 1B
Eye Dam. Cat. 1
Repr. Cat. 1B
Aquatic Acute Cat. 3

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS08 - Serious health hazard

GHS08

Hazard Statements

H227 Combustible liquid.
H314 Causes severe skin burns and eye damage.
H360F May damage fertility.
H402 Harmful to aquatic life.

Precautionary Statements

P201 Obtain special instructions before use.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P260 Do not breathe mist/vapours/spray.
P264 Wash all exposed external body areas thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves, protective clothing, eye protection and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice/ attention.
P310 Immediately call a POISON CENTER/doctor/physician/first aider.
P363 Wash contaminated clothing before reuse.
P370 + P378 In case of fire: Use alcohol resistant foam or normal protein foam to extinguish.
P403 Store in a well-ventilated place.
P405 Store locked up.
P501 Dispose of contents/container to authorised hazardous or special waste collection point in accordance with any local regulation.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Organotin compound, as --- --- No
dioctyltin.dinonansate 68299-15-0 20 - 40% No
Silicic acid ester --- --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If fumes or combustion products are inhaled remove from contaminated area. Lay patient down. Keep warm and rested. Prostheses such as false teeth, which may block airway, should be removed, where possible, prior to initiating first aid procedures. Apply artificial respiration if not breathing, preferably with a demand valve resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if necessary. Transport to hospital, or doctor.

Skin contact

Immediately flush body and clothes with large amounts of water, using safety shower if available. Quickly remove all contaminated clothing, including footwear. Wash skin and hair with running water. Continue flushing with water until advised to stop by the Poisons Information Centre. Transport to hospital, or doctor.

Symptoms: The material produces erythematous skin lesions.

Eye contact

Immediately hold eyelids apart and flush the eye continuously with running water. Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids. Continue flushing until advised to stop by the Poisons Information Centre or a doctor, or for at least 15 minutes. Transport to hospital or doctor without delay. Removal of contact lenses after an eye injury should only be undertaken by skilled personnel.

Ingestion

For advice, contact a Poisons Information Centre or a doctor at once. Urgent hospital treatment is likely to be needed. If swallowed do NOT induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain open airway and prevent aspiration. Observe the patient carefully. Never give liquid to a person showing signs of being sleepy or with reduced awareness; i.e. becoming unconscious. Give water to rinse out mouth, then provide liquid slowly and as much as casualty can comfortably drink. Transport to hospital or doctor without delay.

Immediate Medical Attention

Urgent hospital treatment is likely to be needed. Transport to hospital or doctor without delay.

Medical Treatment

Management is primarily supportive. Surgical decompression was considered to be the only treatment that offered any benefit in human cases of cerebral oedema caused by trialkyl compounds.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam. Dry chemical powder. BCF (where regulations permit). Carbon dioxide. Water spray or fog - Large fires only.

Specific hazards

Combustible. Slight fire hazard when exposed to heat or flame. Heating may cause expansion or decomposition leading to violent rupture of containers. Mists containing combustible materials may be explosive.

Instructions

Alert Fire Brigade and tell them location and nature of hazard. Prevent, by any means available, spillage from entering drains or water course. Use water delivered as a fine spray to control fire and cool adjacent area. Avoid spraying water onto liquid pools. DO NOT approach containers suspected to be hot. Cool fire exposed containers with water spray from a protected location.

Firefighter Protection

Wear full body protective clothing with breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Minor Spills: Remove all ignition sources. Clean up all spills immediately. Avoid breathing vapours and contact with skin and eyes. Control personal contact with the substance, by using protective equipment. Contain and absorb spill with sand, earth, inert material or vermiculite. Wipe up. Place in a suitable, labelled container for waste disposal. Major Spills: Moderate hazard. Clear area of personnel and move upwind. Alert Fire Brigade and tell them location and nature of hazard. Wear breathing apparatus plus protective gloves. Prevent, by any means available, spillage from entering drains or water course. No smoking, naked lights or ignition sources. Increase ventilation.

Small spill

Remove all ignition sources. Clean up all spills immediately. Avoid breathing vapours and contact with skin and eyes. Control personal contact with the substance, by using protective equipment. Contain and absorb spill with sand, earth, inert material or vermiculite. Wipe up. Place in a suitable, labelled container for waste disposal.

Large spill

Moderate hazard. Clear area of personnel and move upwind. Alert Fire Brigade and tell them location and nature of hazard. Wear breathing apparatus plus protective gloves. Prevent, by any means available, spillage from entering drains or water course. No smoking, naked lights or ignition sources. Increase ventilation.

Environmental

See section 12

Cleanup methods

Wipe up. Place in a suitable, labelled container for waste disposal.

Materials: sand, earth, inert material or vermiculite

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

DO NOT allow clothing wet with material to stay in contact with skin • Avoid all personal contact, including inhalation. • Wear protective clothing when risk of exposure occurs. • Use in a well-ventilated area. • Prevent concentration in hollows and sumps. • DO NOT enter confined spaces until atmosphere has been checked. • Avoid smoking, naked lights or ignition sources. • Avoid contact with incompatible materials.

Storage

Store in original containers. • Keep containers securely sealed. • No smoking, naked lights or ignition sources. • Store in a cool, dry, well-ventilated area. • Store away from incompatible materials and foodstuff containers. • Protect containers against physical damage and check regularly for leaks. • Observe manufacturer's storage and handling recommendations contained within this SDS.

Fire prevention

Avoid smoking, naked lights or ignition sources.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Colourless liquid with a slight odour; does not mix with water.
Colour
---
Colour Intensity
---
Form
---
Odor
Not Available
Odor Threshold
Not Available
Ph
Not Applicable
Melting Point
Not Available
Boiling Point
225-230 °C
Flash Point
70 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not Available
Vapor Pressure
---
Vapor Density
---
Relative Density
0.94
Bulk Density
---
Density
---
Flammability
Combustible.
Upper Explosive Limit
Not Available
Lower Explosive Limit
Not Available
Explosive Limits
---
Auto Ignition Temperature
>240 °C
Decomposition Temperature
Not Available
Solubility
---
Partition Coefficient
---
Solubility In Water
Immiscible
Solubility In Fat
---
Molecular Weight
Not Applicable
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
2 cSt @ 23 degC
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

▶ Unstable in the presence of incompatible materials. ▶ Product is considered stable. ▶ Hazardous polymerisation will not occur.

Reactivity

See section 7

Hazardous reactions

See section 7

Avoid

See section 7

Incompatible

See section 7

Decomposition

See section 5

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Toxicity

Toxicity | WACKER CATALYST T 37 | Endpoint | Test Duration (hr) | Species | Value | Source | | --- | --- | --- | --- | --- | --- | | | Not Available | Not Available | Not Available | Not Available | Not Available | | dioctyltin dinonanoate | Endpoint | Test Duration (hr) | Species | Value | Source |

12.1 Toxicity

| dioctyltin dinonanoate | Endpoint | Test Duration (hr) | Species | Value | Source | | | NOEC(ECₓ) | 72h | Algae or other aquatic plants | 0.04mg/l | 2 | | | LC50 | 96h | Fish | >5.8mg/l | 2 | | | EC50 | 72h | Algae or other aquatic plants | 0.17mg/l | 2 | | | EC50 | 48h | Crustacea | 0.17mg/l | 2 | | | EC50 | 96h | Algae or other aquatic plants | 89mg/l | 2 |
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Legislation addressing waste disposal requirements may differ by country, state and/or territory. Each user must refer to laws operating in their area. In some areas, certain wastes must be tracked. A Hierarchy of Controls seems to be common - the user should investigate: ► Reduction ► Reuse ► Recycling ► Disposal (if all else fails) This material may be recycled if unused, or if it has not been contaminated so as to make it unsuitable for its intended use. If it has been contaminated, it may be possible to reclaim the product by filtration, distillation or some other means. Shelf life considerations should also be applied in making decisions of this type. Note that properties of a material may change in use, and recycling or reuse may not always be appropriate.

Disposal

Recycle wherever possible or consult manufacturer for recycling options. Consult State Land Waste Authority for disposal. Bury or incinerate residue at an approved site.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

dioctyltin dinonanoate is found on the following regulatory lists: Australia Hazardous Chemical Information System (HCIS) - Hazardous Chemicals, Australian Inventory of Industrial Chemicals (AIIC), Chemical Footprint Project - Chemicals of High Concern List

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is WACKER CATALYST T 37 known by?

WACKER CATALYST T 37 is also known as: Not Available

What is the hazard signal word for WACKER CATALYST T 37?

The signal word is danger.

What is the physical form of WACKER CATALYST T 37?

WACKER CATALYST T 37 is a liquid appearing as colourless liquid with a slight odour; does not mix with water. . It has not available odor.

What is WACKER CATALYST T 37 used for?

Intermediate chemical. Use according to manufacturer's directions.

What are the hazard statements for WACKER CATALYST T 37?

This substance has 4 hazard statements:

  • H227: Combustible liquid.
  • H314: Causes severe skin burns and eye damage.
  • H360F: May damage fertility.
  • H402: Harmful to aquatic life.

What is the melting point of WACKER CATALYST T 37?

The melting point is Not Available and the boiling point is 225-230 °C.