Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Celatom® FP-1, FP-2, FP-22, FP-3, FP-4, FP-6, AW-2, AW-3, AW-4, AW-6
- Chemical Name
- Diatomaceous Earth (Kieselguhr) Calcined
Regulatory Identifiers
- CAS Number
- 91053-39-3, 14464-46-1 Check regulations →
- EC Number
- 293-303-4, 238-455-4 Check regulations →
Identified Uses
Used as a carrier, a silica source or as a functional additive for paint, cosmetics, plastics, rubber or other applications. Use as filter aid in industrial settings.
Uses advised against
Anything other than the above.
Manufacturers & Suppliers
EP Minerals, LLC
manufacturer
9785 Gateway Drive, Reno, Nevada 89521, USA
+1-775-824-7600
EP Minerals Europe GmbH & Co, KG
importer
Rehrhofer Weg 115 D-29633, Munster, Germany
+49 51 92 98970
Emergency Contacts
Emergency Contact
+49 51 92 98970
08:00–17:00 CET
EN, FR, DE
Emergency Contact
+1-775-824-7600
08:00–17:00 PST
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Diatomaceous Earth (Kieselguhr) Calcined EC: 293-303-4 | 91053-39-3 | 100% | No |
| Cristobalite (Respirable Dust) EC: 238-455-4 | 14464-46-1 | 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Blow nose to evacuate dust.
Symptoms: Irritation
Remove clothing and wash thoroughly before use. Wash affected skin with soap and water.
Symptoms: Skin irritation or rash
Flush eyes with water for at least 15 minutes while holding eyelids open.
Symptoms: Eye irritation
Rinse mouth. Give plenty of water to drink.
Immediate Medical Attention
Get medical attention if irritation develops or persists (inhalation, skin, eyes). Get medical attention (ingestion).
Medical Treatment
Unlikely to be required but if necessary treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish with carbon dioxide, dry chemical, foam or waterspray. As appropriate for surrounding fire.
None.
Non-flammable, Non-combustible, Not explosive.
Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
Fire fighters should wear complete protective clothing including self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Avoid generation of dust. Do not breathe dust. Wear appropriate personal protective equipment, avoid direct contact.
No special requirements.
Sweep spilled substances into containers, use vacuum equipment for collecting spilt materials, transfer to a container for disposal.
Related Products
Similar products with comparable safety profiles
Celatom® FW-6, FW-12, FW-14, FW-18, FW-20, FW-40, FW-50, FW-60, FW-70, FW-80, SP, AW-12, AW-14, AW-18, AW-20
CAS: 68855-54-9
CERATEMP FR5
---
Kane Ace™ FM22, FM50, FM56, FM57, UF100, UF600
---
INDOPOL® H-25, H-25 SR, H-50, H-100, H-100 CP, H-300, H-300 C, H-300 CP, H-1200, H1200 CP
---
INDOPOL® H-25, H-25 SR, H-50, H-100, H-100 CP, H-300, H-300 C, H-300 CP, H-1200, H1200 CP
CAS: 9003-29-6, 9044-17-1
ENERPAC HF-95X, HF-95Y, HF-95Z, HF-95T, HF-95200
---
LR20, LR14, LR6, LR03, LR1, 6LR61(6LF22), LR8D425
---
LC10EC, LC12EC, LC15EC, LC101C, LC103C, LC105C, LC110C, LC111C, LC113C, LC115C, LC121C, LC123C, LC125XLC, LC131C, LC133C, LC135XLC, LC161C, LC163C, LC505C, LC525XLC, LC535XLC, LC545XLC, LC563C, LC565XLC, LC583C, LC585XLC, LC595XLC
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle packaged products carefully to prevent accidental bursting. If you require advice on safe handling techniques, please contact your supplier or check the Good Practice Guide referred to in section 16. Avoid generation of dust. In case of inadequate ventilation wear respiratory protection. Do not breathe dust. Wear protective gloves/protective clothing/eye protection/face protection. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Wash hands before breaks and after work.
Stable under normal conditions. Store in a dry place.
Do not eat, drink or smoke when using this product. Wash hands before breaks and after work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. Atmospheric levels should be controlled in compliance with the occupational exposure limit. Avoid dust generation.
Wear suitable gloves if prolonged skin contact is likely - Wear impervious gloves (EN374).
Wear eye protection with side protection (EN166).
Atmospheric levels should be controlled in compliance with the occupational exposure limit. In case of inadequate ventilation wear respiratory protection. Recommended: Half-face mask (DIN EN 140), Filter type P2/P3 - efficiency of at least 90%
Use skin barrier cream before handling the product.
Avoid wind dispersal.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under normal conditions.
Stable under normal conditions.
Do not leave in enclosed spaces when mixed with highly flammable material, as heat can build up over long periods of time and flammable material may eventually ignite.
Hydrofluoric Acid
No hazardous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
The product is predicted to have low mobility in soil.
12.5 Results of PBT and vPvB assessment
The substance is inorganic and does not meet the criteria for PBT or vPvB in accordance with Annex XIII of REACH.
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents in accordance with local, state or national legislation.
Dispose of contents in accordance with local, state or national legislation.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Authorisations and/or Restrictions On Use: None.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Celatom® FP-1, FP-2, FP-22, FP-3, FP-4, FP-6, AW-2, AW-3, AW-4, AW-6?
The signal word is no signal word.
What is the physical form of Celatom® FP-1, FP-2, FP-22, FP-3, FP-4, FP-6, AW-2, AW-3, AW-4, AW-6?
Celatom® FP-1, FP-2, FP-22, FP-3, FP-4, FP-6, AW-2, AW-3, AW-4, AW-6 is a solid appearing as buff - pink powder with buff - pink color. It has odourless odor.
What is the solubility of Celatom® FP-1, FP-2, FP-22, FP-3, FP-4, FP-6, AW-2, AW-3, AW-4, AW-6?
<1% Water; Soluble in: Hydrofluoric Acid
What is Celatom® FP-1, FP-2, FP-22, FP-3, FP-4, FP-6, AW-2, AW-3, AW-4, AW-6 used for?
Used as a carrier, a silica source or as a functional additive for paint, cosmetics, plastics, rubber or other applications. Use as filter aid in industrial settings.
What is the melting point of Celatom® FP-1, FP-2, FP-22, FP-3, FP-4, FP-6, AW-2, AW-3, AW-4, AW-6?
The melting point is Not applicable. and the boiling point is Decomposes below boiling point at (°C): >1300°C.