Kane Ace™ FM22, FM50, FM56, FM57, UF100, UF600

Remove person to fresh air. If signs/symptoms continue, get medical attention.

Symptoms: May cause nose, throat, and lung irritation. (dust).

After contact with skin, wash immediately with plenty of water and soap. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Contact with dust may cause mechanical irritation or drying of the skin.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Dust may cause painful eye irritation and tearing.

Get immediate medical advice/attention. Rinse mouth. Induce vomiting if person is conscious. Never give anything by mouth to an unconscious person.

Symptoms: This product has no known adverse effect on human health. Non-hazardous substance.

Water spray, Alcohol resistant foam, Carbon dioxide, Dry extinguishing powder.

Strong water jet. Do not use a solid water stream as it may scatter and spread fire.

Non flammable. May form explosive dust-air mixture. Do not allow run-off from fire-fighting to enter drains or water courses.

Evacuate area. Use water spray or fog for cooling exposed containers. Contain the extinguishing fluids by bunding. Prevent fire fighting water from entering the environment.

Ensure procedures and training for emergency decontamination and disposal are in place.

Do not allow to enter into surface water or drains.

Take up mechanically (sweeping, shovelling) and collect in suitable container for disposal.

Provide adequate ventilation. Use personal protective equipment as required. Concerning personal protective equipment to use, see section 8. Do not breathe dust. Avoid contact with skin, eyes and clothing. Avoid dust formation. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharges. Take any precaution to avoid mixing with Incompatible materials, Refer to Section 10 on Incompatible Materials. Do not allow to enter into surface water or drains.

Keep containers tightly closed in a dry, cool and well-ventilated place. Protect from sunlight.

Keep good industrial hygiene. Wash hands and face before breaks and immediately after handling of the product. When using do not eat, drink or smoke. Remove contaminated clothing and shoes.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharges.

Use only in area provided with appropriate exhaust ventilation. Apply measures to prevent dust explosions. Provide adequate precautions, such as electrical grounding and bonding, or inert atmospheres. Organisational measures to prevent/limit releases, dispersion and exposure. See also section 7.

The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves. (EN388). Impervious gloves : . All types

Safety glasses with side-shields (EN166)

In case of insufficient ventilation, wear suitable respiratory equipment. Effective dust mask (EN149). Filter type: type P1

Wear suitable protective clothing. Overall. Chemical resistant safety shoes.

Avoid release to the environment. Comply with applicable Community environmental protection legislation.

Stable at ambient temperature and under normal conditions of use.

None under normal conditions. Reference to other sections 10.5.

Potential dust explosion hazard. Hydrolyses in presence of: Strong acids, Heat.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep at temperature not exceeding 50 °C. See Section 7 for information on safe handling.

Oxidising agents. Acids. See Section 7 for information on safe handling.

Burning produces noxious and toxic fumes. Possible decomposition products are: Carbon oxides. Sulphur oxides.

Refer to manufacturer/supplier for information on recovery/recycling. Can be incinerated, when in compliance with local regulations.

Refer to manufacturer/supplier for information on recovery/recycling. Can be incinerated, when in compliance with local regulations.