Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Alpa Gel Cimco –A
- Product Code
- 151010, 151012, 151014
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Electrical and electronics industry
Manufacturers & Suppliers
Cimco Werkzeugfabrik Carl Jul. Müller GmbH & Co. KG
manufacturer
Hohenhagener Straße 1 - 5, D-42855 Remscheid, Germany
+49 (0) 21913718-01
Emergency Contacts
GBK GmbH
+49 (0)6132-84463
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Chemical characterisation: Addition-curing silicon polymer.
Notes
No hazardous constituents according to ordinance (EC) No. 1907/2006
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the affected person into the fresh air.
In the event of skin contact, mechanically remove with cloth or paper. Immediately wash off with soap and lots of water.
In the event of contact with the eyes, immediately rinse thoroughly with lots of water.
Do not induce vomiting. Rinse mouth with water.
Immediate Medical Attention
In the event of complaints (inhalation), long-term skin irritation (skin), or if symptoms persist (eyes), seek medical assistance/consult a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, extinguishing powder, carbon dioxide, water spray
Direct water jet
In case of fire, hazardous decomposition products can occur.
To cool sealed containers, use a water spray.
Firefighter Protection
In the presence of combustion or carbonization gases, any firefighting, rescue and clearing up activities should be undertaken only with heavy-duty respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective clothing. Dirty surfaces become extremely slippery.
Prevent the product from entering the drain system, water courses, or soil. Pay attention to local official regulations.
Clean soiled areas thoroughly.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation and/or extraction in the work rooms. Do not smoke, eat, drink or sniff while working. Wash hands before breaks and after finishing work.
Store cool and dry. Protect from frost. Protect from humidity and water.
Do not smoke, eat, drink or sniff while working. Wash hands before breaks and after finishing work.
Pay attention to usual rules of preventative fire protection. Keep away from ignition sources – Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation and/or extraction in the work rooms.
Nitrile rubber Protection index class 6 Penetration time: > 480 min Glove thickness: > 0.35 mm The breakthrough times determined according to EN 374 Part III are not tested under practical conditions. We therefore recommend a maximum wearing time of 50% of the breakthrough time. Selection of a suitable glove depends not only on the material but also on other quality features and varies from one manufacturer to another.
Safety glasses
If ventilation is inadequate, wear breathing apparatus. Recommended filter type: combination filter A/P
Protective clothing
Prevent the product from entering the drain system, water courses, or soil. Pay attention to local official regulations.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
No hazards particularly to be mentioned.
No known hazardous reactions if used as intended.
Protect from moisture.
Acids, Bases
No decomposition when stored and used as intended.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bio accumulation potential
12.4 Mobility in the soil
12.5 Results of PBT and vPvB assessment
12.6. Other harmful effects
The product is not water-soluble, preventing determination of ecological data like COD and BOD. It does not contain heavy metals or compounds listed under EC directive 2000/60/EC.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local authority regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is classified and marked pursuant to EC Directives or the relevant national laws.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Alpa Gel Cimco –A?
The signal word is no signal word.
What is the physical form of Alpa Gel Cimco –A?
Alpa Gel Cimco –A is a liquid with transparent color. It has odourless odor.
What is Alpa Gel Cimco –A used for?
Electrical and electronics industry
What is the melting point of Alpa Gel Cimco –A?
The melting point is - na - and the boiling point is - na -.