Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Alpacon Multi CIP II
- Product Code
- 1899900-16 (5L)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning material/ Detergent
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Alfa Laval Tumba AB
manufacturer
Hans Stahles väg 7, S-147 80 TUMBA, SWEDEN
Emergency Contacts
Emergency Contact
999
NHS direct
111
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethoxylated alcohol C 9/11 | 68439-46-3 | 10 - 25% | Yes |
| Quaternary coco alkyl methyl amine ethoxylate methyl chloride | 863679-20-3 | 2.5 - 10% | Yes |
For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water. Then consult a doctor.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Not required
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
No special requirements.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperature conditions and recommended use
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No decomposition if used according to specifications.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Alpacon Multi CIP II?
The signal word is danger.
What is the physical form of Alpacon Multi CIP II?
Alpacon Multi CIP II is a liquid with yellowish color. It has light odor.
What is Alpacon Multi CIP II used for?
Cleaning material/ Detergent
What are the hazard statements for Alpacon Multi CIP II?
This substance has 1 hazard statement:
- H318: Causes serious eye damage.
What is the melting point of Alpacon Multi CIP II?
The melting point is Undetermined. and the boiling point is 100 °C.